MICROCRE · RESEARCH SCIENCE
Steels and welded structures
Translation pending review.
Research objective
Connect processing, weld location and surface state to geometry, microstructure, hardness and bulk mechanics.
Research questions
母材、热影响区和焊缝的组织变化是否与硬度及断裂位置对应?
几何偏差来自加工、热变形还是装夹与温度测量条件?
不同方向、表面和加载模式的结果是否真正可比?
Structure–property relationships
晶粒、相分布和热历史共同影响局部响应;需要显微证据与独立力学结果配对。
孔隙、夹杂及表面缺陷可能改变疲劳或冲击表现,平均硬度无法完整描述这些影响。
尺寸、粗糙度和残余状态影响装配与服役;测量报告需保留基准及空间尺度。
Limitations
硬度与强度换算必须有材料及状态适用依据。
实验室局部结果不能单独构成构件服役安全或寿命结论。
Related instruments, methods and research
Coordinate measuring machines →Metallographic cutting →Electronic universal testers →Impact testers →Metallurgical microscopes →Grinding & polishing →Vickers hardness testers →
Bore dimensions and coaxial datum chains →Reference planes: flatness, straightness and support →Microstructural dimensions: grains, phases and pores →Shaft metrology: diameter, roundness and cylindrical form →Surface roughness: direction, filtering and function →Compression: end faces, friction and instability →Environmental durability: exposure and paired controls →Fatigue: stress ratio, cycles and run-outs →Impact testing: notch, temperature and absorbed energy →Hardness and indentation: scale and contact models →Tensile properties: dimensions, stress–strain and fracture →
Coordinate measuring machines →Metallographic cutting →Electronic universal testers →Impact testers →Metallurgical microscopes →Grinding & polishing →Vickers hardness testers →
Paper links indicate related methods or objects; they do not establish use of this instrument model.
Orientation imaging microscopy: application to the measurement of grain boundary structure →Orientation imaging: The emergence of a new microscopy →The impact of magnesium content on lithium-magnesium alloy electrode performance with argyrodite solid electrolyte →Ultraviolet digital image correlation (UV-DIC) for high temperature applications →Influences of pileup on the measurement of mechanical properties by load and depth sensing indentation techniques →Certification of Standard Reference Material® 2261a: Chlorinated Pesticides in Hexane (Nominal Mass Concentration 2 µg/mL) →Scaling approach to conical indentation in elastic-plastic solids with work hardening →Using nanoindentation to study the aging of cellulose acetate in cinematographic films →Computational modeling of the forward and reverse problems in instrumented sharp indentation →A procedure for extracting primary and secondary creep parameters from nanoindentation data →Size-affected single-slip behavior of pure nickel microcrystals →A method for interpreting the data from depth-sensing indentation instruments →Temperature dependence of the indentation size effect →The Measurement and Uncertainty of a Calibration Standard for the Scanning Electron Microscope →Distance-dependent influences on angle metrology with autocollimators in deflectometry →Environmental influences on autocollimator-based angle and form metrology →Self-calibration strategies for reducing systematic slope measurement errors of autocollimators in deflectometric profilometry →A novel approach for extending autocollimator calibration from plane to spatial angles →Size dependence of mechanical properties of gold at the micron scale in the absence of strain gradients →Infrared Optical Properties of Materials →Anisotropy oxidation behavior and mechanism of textured Ti3(SiAl)C2 ceramic →A simple method for high-precision calibration of an angle encoder using an electronic nulling autocollimator →Evaluation of measurement data — Guide to the expression of uncertainty in measurement →Evaluation of measurement data — Guide to the expression of uncertainty in measurement. Amendment 1: Nonlinearity in measurement models →Evaluation of measurement data — Supplement 1 to the GUM — Propagation of distributions using a Monte Carlo method →Guide to the expression of uncertainty in measurement — Part 6: Developing and using measurement models →Transmission EBSD from 10 nm domains in a scanning electron microscope →Guidelines for Evaluating and Expressing the Uncertainty of NIST Measurement Results →Indentation size effects in crystalline materials: A law for strain gradient plasticity →An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments →Two-dimensional digital image correlation for in-plane displacement and strain measurement: a review →On the generality of the relationship among contact stiffness, contact area, and elastic modulus during indentation →Traceability Calibration, & Measurement Uncertainty Issues Regarding Coordinate Measuring Machines and Other Complex Instruments →Discrepancies between roughness measurements obtained with phase-shifting and white-light interferometry →Fiji: an open-source platform for biological-image analysis →NIH Image to ImageJ: 25 years of image analysis →Surface characterization of an ultra-soft contact lens material using an atomic force microscopy nanoindentation method →Comparison of Bulk and Micro Sampling Techniques for the Elemental Analysis of SRM 610 and 612 →High-Temperature Mechanical Characterization of CeO2 as a Ceramic Surrogate Fuel Based on FIB and Nanoindentation →AFM z-piezo calibration method for height measurements in the sub-nanometer to nanometer range using stepped surfaces →Uncertainties in Small-Angle Measurement Systems Used to Calibrate Angle Artifacts →Determination of displacements using an improved digital correlation method →Hot nanoindentation in inert environments →Sample dimensions influence strength and crystal plasticity →Certification of Standard Reference Material® 2246a Relative Intensity Correction Standard for Raman Spectroscopy: 830 nm Excitation →NIST Surface Roughness and Step Height Calibrations: Measurement Conditions and Sources of Uncertainty →Measurement of high temperature full-field strain up to 2000 °C using digital image correlation →Mechanical Metallurgy on Columbia Gas X100 Experimental Pipe →High-resolution elastic strain measurement from electron backscatter diffraction patterns: new levels of sensitivity →A systematic study of sample preparation-induced martensitic phase formation in 304 L austenitic stainless steel →ASTM Technical Committee Guidance — DIC 测量的报告要求 →EURAMET Calibration Guide — 硬度计校准与不确定度评定 →NPL Good Practice Guide — DIC 散斑制备与质量评价 →NPL Good Practice Guide — 不确定度预算的编制 →Digital image correlation using Newton-Raphson method of partial differential correction →Applications of digital-image-correlation techniques to experimental mechanics →Scanning Electron Microscopy and X-ray Microanalysis →Evaluation of measurement data — Guide to the expression of uncertainty in measurement (GUM) →Two-dimensional digital image correlation for in-plane displacement and strain measurement: a review — Extended reading 31 →Digital imaging techniques in experimental stress analysis →Image Correlation for Shape, Motion and Deformation Measurements →
