金相试样磨抛机 — Avoiding smearing between composite plies
A schematic of the measurement chain, not device footage or data.
Schematic demonstration: scale, speed and colour do not represent instrument measurements.
Translation pending review.
Instrument role
Measurement and analysis
Operating principle
For this task the 金相试样磨抛机 family measures as follows: Avoiding smearing between composite plies. The general relation and its conditions are given below; confirm force, travel, resolution and accessories for a specific model.
σ = F / A₀
- Symbol
F
ItemForce
UnitN
- Symbol
A0
ItemOriginal area
Unitmm²
Conditions are stable and calibrated as defined
Inputs are independent without unmodelled bias
Interpretation stays within this family and the stated conditions
Research objects
Research object: Inconel 718 additively manufactured part
Research object: Ti-6Al-4V additively manufactured part
Research object: AlSi10Mg die-cast aluminium
Research questions
What dominates the error budget for Avoiding smearing between composite plies?
Does the conclusion hold for another batch or process?
Applications
Avoiding smearing between composite plies: Inconel 718 additively manufactured part
Avoiding smearing between composite plies: Ti-6Al-4V additively manufactured part
From specimen to result
- 01Title
Define the section plane and location
ActionTurn the task into verifiable measurands: state which standard or technical agreement defines %s, and fix the record fields.
InputPrevious output
OutputStep 1 record
Quality gateThe acceptance basis traces to a standard clause or technical agreement
If the check failsInstruments for this stepReturn and re-check
- 02Title
Select cutting process and cooling
ActionPrepare specimens or measurement points for the material and purpose: select the cut-off wheel and cooling by hardness and microstructure, then grind and polish stepwise with cleaning between steps to avoid smearing and relief.
InputPrevious output
OutputStep 2 record
Quality gateEnvironmental conditions and stabilisation time are logged continuously
If the check failsInstruments for this stepReturn and re-check
- 03Title
Mount and label the specimen
ActionVerify calibration status, fixtures and sensor ranges against the environmental envelope; complete the uncertainty budget before measuring.
InputPrevious output
OutputStep 3 record
Quality gateRaw data, processing and the decision are reproducible
If the check failsInstruments for this stepReturn and re-check
- 04Title
Grind and polish stepwise
ActionExecute the fixed method with identical parameters; stabilise the environment within the specified time and log any abnormal condition separately.
InputPrevious output
OutputStep 4 record
Quality gateThe acceptance basis traces to a standard clause or technical agreement
If the check failsInstruments for this stepReturn and re-check
- 05Title
Etch and inspect under the microscope
ActionJudge the main value, outliers and repeatability; keep raw records for any rejected point and state the basis instead of deleting it.
InputPrevious output
OutputStep 5 record
Quality gateEnvironmental conditions and stabilisation time are logged continuously
If the check failsInstruments for this stepReturn and re-check
- 06Title
Record parameters and artefacts
ActionReport method, conditions, results, uncertainty and applicability limits; do not extrapolate beyond the tested environment.
InputPrevious output
OutputStep 6 record
Quality gateRaw data, processing and the decision are reproducible
If the check failsInstruments for this stepReturn and re-check
Methods and standards
sectioning, mounting and polishing workflow
Confirm force, range and threshold against the applicable standard
Standards and applicability
GB/T 13298-2015
ASTM E3-11
ASTM E1920-03
Configuration and service checks
Calibration and intermediate check records
Fixtures, accessories and range confirmation
Limitations
Family-level guidance, not a specific model capability
Re-confirm method and criteria outside the stated conditions
Search terms
金相制样
DIC
散斑
离子束
电子束
仪器全自动化
自动制样
Related instruments, methods and research
Paper links indicate related methods or objects; they do not establish use of this instrument model.
Relation commonly used for this task
