金相显微镜 — Stereo observation and 3D topography
A schematic of the measurement chain, not device footage or data.
Schematic demonstration: scale, speed and colour do not represent instrument measurements.
Translation pending review.
Instrument role
Measurement and analysis
Operating principle
For this task the 金相显微镜 family measures as follows: Stereo observation and 3D topography. The general relation and its conditions are given below; confirm force, travel, resolution and accessories for a specific model.
ε̇ = v / L₀
- Symbol
v
ItemLoading speed
Unitmm/s
- Symbol
L0
ItemGauge length
Unitmm
Conditions are stable and calibrated as defined
Inputs are independent without unmodelled bias
Interpretation stays within this family and the stated conditions
Research objects
Research object: Si3N4 silicon nitride ceramic
Research object: SiC silicon carbide ceramic
Research object: Al2O3 alumina ceramic
Research questions
What dominates the error budget for Stereo observation and 3D topography?
Does the conclusion hold for another batch or process?
Applications
Stereo observation and 3D topography: 45 carbon steel
Stereo observation and 3D topography: 42CrMo quenched and tempered steel
From specimen to result
- 01Title
Fix the purpose and magnification
ActionTurn the task into verifiable measurands: state which standard or technical agreement defines %s, and fix the record fields.
InputPrevious output
OutputStep 1 record
Quality gateThe acceptance basis traces to a standard clause or technical agreement
If the check failsInstruments for this stepReturn and re-check
- 02Title
Prepare and clean the surface
ActionPrepare specimens or measurement points for the material and purpose: select the objective by magnification and working distance, calibrate the scale and white balance, avoid clipping, and compare quantitatively under identical illumination and thresholds.
InputPrevious output
OutputStep 2 record
Quality gateEnvironmental conditions and stabilisation time are logged continuously
If the check failsInstruments for this stepReturn and re-check
- 03Title
Calibrate scale and illumination
ActionVerify calibration status, fixtures and sensor ranges against the environmental envelope; complete the uncertainty budget before measuring.
InputPrevious output
OutputStep 3 record
Quality gateRaw data, processing and the decision are reproducible
If the check failsInstruments for this stepReturn and re-check
- 04Title
Capture representative images
ActionExecute the fixed method with identical parameters; stabilise the environment within the specified time and log any abnormal condition separately.
InputPrevious output
OutputStep 4 record
Quality gateThe acceptance basis traces to a standard clause or technical agreement
If the check failsInstruments for this stepReturn and re-check
- 05Title
Segment and measure with thresholds
ActionJudge the main value, outliers and repeatability; keep raw records for any rejected point and state the basis instead of deleting it.
InputPrevious output
OutputStep 5 record
Quality gateEnvironmental conditions and stabilisation time are logged continuously
If the check failsInstruments for this stepReturn and re-check
- 06Title
Review statistics and report
ActionReport method, conditions, results, uncertainty and applicability limits; do not extrapolate beyond the tested environment.
InputPrevious output
OutputStep 6 record
Quality gateRaw data, processing and the decision are reproducible
If the check failsInstruments for this stepReturn and re-check
Methods and standards
microscopic observation and image measurement
Confirm force, range and threshold against the applicable standard
Standards and applicability
GB/T 11354-2005
GB/T 224-2019
GB/T 10561-2005
GB/T 6394-2017
GB/T 13298-2015
Configuration and service checks
Calibration and intermediate check records
Fixtures, accessories and range confirmation
Limitations
Family-level guidance, not a specific model capability
Re-confirm method and criteria outside the stated conditions
Search terms
显微成像
DIC
散斑
离子束
电子束
芯片测试
显微分析
Related instruments, methods and research
Paper links indicate related methods or objects; they do not establish use of this instrument model.
Relation commonly used for this task
