Consumable consistency across batches: complete workflow
Translation pending review.
Research track
dimension
Research objective
Test plan for "Consumable consistency across batches". Specimens of 45 carbon steel are measured under ultra-high vacuum 1e-7 Pa following support process and automation integration. The plan fixes sampling, measurement parameters, acceptance basis and record format, and reports wear volume and friction coefficient with explicit limits of interpretation.
Objective
Obtain a reproducible wear volume and friction coefficient under ultra-high vacuum 1e-7 Pa.
Required inputs
Specimen condition and batch
Calibration and range confirmation
Acceptance basis and record sheet
Workflow steps
- 01Title
Define the support goal and interfaces
ActionTurn the task into verifiable measurands: state which standard or technical agreement defines %s, and fix the record fields.
InputOutput of the previous step and the environment log
OutputStep 1 record: wear volume and friction coefficient
Quality gateThe acceptance basis traces to a standard clause or technical agreement
If the check failsInstruments for this stepReturn to this step and re-check inputs and equipment
- 02Title
Verify incoming parts and fixturing
ActionPrepare specimens or measurement points for the material and purpose: define cycle time, interfaces and safety limits, verify incoming consistency and fixture location, then connect data acquisition and traceability fields.
InputOutput of the previous step and the environment log
OutputStep 2 record: wear volume and friction coefficient
Quality gateEnvironmental conditions and stabilisation time are logged continuously
If the check failsInstruments for this stepReturn to this step and re-check inputs and equipment
- 03Title
Set process parameters and cycle
ActionVerify calibration status, fixtures and sensor ranges against the environmental envelope; complete the uncertainty budget before measuring.
InputOutput of the previous step and the environment log
OutputStep 3 record: wear volume and friction coefficient
Quality gateRaw data, processing and the decision are reproducible
If the check failsInstruments for this stepReturn to this step and re-check inputs and equipment
- 04Title
Interlock equipment and safety
ActionExecute the fixed method with identical parameters; stabilise the environment within the specified time and log any abnormal condition separately.
InputOutput of the previous step and the environment log
OutputStep 4 record: wear volume and friction coefficient
Quality gateThe acceptance basis traces to a standard clause or technical agreement
If the check failsInstruments for this stepReturn to this step and re-check inputs and equipment
- 05Title
Acquire data and traceability ID
ActionJudge the main value, outliers and repeatability; keep raw records for any rejected point and state the basis instead of deleting it.
InputOutput of the previous step and the environment log
OutputStep 5 record: wear volume and friction coefficient
Quality gateEnvironmental conditions and stabilisation time are logged continuously
If the check failsInstruments for this stepReturn to this step and re-check inputs and equipment
- 06Title
Review yield and maintenance
ActionReport method, conditions, results, uncertainty and applicability limits; do not extrapolate beyond the tested environment.
InputOutput of the previous step and the environment log
OutputStep 6 record: wear volume and friction coefficient
Quality gateRaw data, processing and the decision are reproducible
If the check failsInstruments for this stepReturn to this step and re-check inputs and equipment
Equations and variables
- Item
离子束斑尺寸
Equationd = √(d₀² + (2 α L)²)
Variables and units源表观尺寸、发散半角、工作距离
Assumptions and limits按定义单位代入;测量条件稳定
Worked example示例值仅用于演示代入过程
Worked example
Assumed inputs for 45 carbon steel under ultra-high vacuum 1e-7 Pa
Substitute step by step and keep significant digits
Produces a teaching value, not an acceptance value
Example excludes systematic equipment bias
Deliverables
Raw records and processing sheet
Result and uncertainty
Errors and risks
Measuring before the environment stabilises
Treating one batch as process capability evidence
Instrument applicability
Organised around the Laboratory support & automation family in the catalogue; confirm model capability and accessories.
Required external capabilities
Preparation, loading or analysis equipment outside this catalogue may be required.
Literature scope
Literature links indicate related methods or objects, not use of our instruments.
Instrument roles in the workflow
| Instrument family | Role and applicability | Workflow steps |
|---|---|---|
Performs a measurement or preparation step | Set process parameters and cycle · Interlock equipment and safety | |
Performs a measurement or preparation step | Set process parameters and cycle · Interlock equipment and safety | |
Performs a measurement or preparation step | Set process parameters and cycle · Interlock equipment and safety |
Language note
V9 结构化生成条目,发布前须由领域工程师复核技术细节。
Search terms
检测方法
标准规范
选型方案
科研流程
模拟实验
