SHANGHAI MICROCRE OPTICS-MECH TECH CO., LTDAbout MICROCRE400-812-7833
MICROCRE · RESEARCH SCIENCE

Temperature compensation and CTE correction: complete workflow

Translation pending review.

Research track

performance

Research objective

Test plan for "Temperature compensation and CTE correction". Specimens of DC53 cold-work die steel are measured under liquid helium -269 °C following dimensional measurement and flaw detection. The plan fixes sampling, measurement parameters, acceptance basis and record format, and reports conductivity and resistivity with explicit limits of interpretation.

Objective

Obtain a reproducible conductivity and resistivity under liquid helium -269 °C.

Required inputs

  • Specimen condition and batch

  • Calibration and range confirmation

  • Acceptance basis and record sheet

Workflow steps

  1. 01
    Title

    Read the drawing, datum and tolerance

    Action

    Turn the task into verifiable measurands: state which standard or technical agreement defines %s, and fix the record fields.

    Input

    Output of the previous step and the environment log

    Output

    Step 1 record: conductivity and resistivity

    Quality gate

    The acceptance basis traces to a standard clause or technical agreement

    If the check fails

    Return to this step and re-check inputs and equipment

    Instruments for this step
  2. 02
    Title

    Clean and thermally soak the part

    Action

    Prepare specimens or measurement points for the material and purpose: soak to 20 °C and clean the surface, establish the datum and frame, calibrate the probe, then choose points and evaluation rules from the drawing.

    Input

    Output of the previous step and the environment log

    Output

    Step 2 record: conductivity and resistivity

    Quality gate

    Environmental conditions and stabilisation time are logged continuously

    If the check fails

    Return to this step and re-check inputs and equipment

    Instruments for this step
  3. 03
    Title

    Calibrate probe or transducer

    Action

    Verify calibration status, fixtures and sensor ranges against the environmental envelope; complete the uncertainty budget before measuring.

    Input

    Output of the previous step and the environment log

    Output

    Step 3 record: conductivity and resistivity

    Quality gate

    Raw data, processing and the decision are reproducible

    If the check fails

    Return to this step and re-check inputs and equipment

    Instruments for this step
  4. 04
    Title

    Acquire points as planned

    Action

    Execute the fixed method with identical parameters; stabilise the environment within the specified time and log any abnormal condition separately.

    Input

    Output of the previous step and the environment log

    Output

    Step 4 record: conductivity and resistivity

    Quality gate

    The acceptance basis traces to a standard clause or technical agreement

    If the check fails

    Return to this step and re-check inputs and equipment

    Instruments for this step
  5. 05
    Title

    Fit features and evaluate tolerance

    Action

    Judge the main value, outliers and repeatability; keep raw records for any rejected point and state the basis instead of deleting it.

    Input

    Output of the previous step and the environment log

    Output

    Step 5 record: conductivity and resistivity

    Quality gate

    Environmental conditions and stabilisation time are logged continuously

    If the check fails

    Return to this step and re-check inputs and equipment

    Instruments for this step
  6. 06
    Title

    Review outliers and report

    Action

    Report method, conditions, results, uncertainty and applicability limits; do not extrapolate beyond the tested environment.

    Input

    Output of the previous step and the environment log

    Output

    Step 6 record: conductivity and resistivity

    Quality gate

    Raw data, processing and the decision are reproducible

    If the check fails

    Return to this step and re-check inputs and equipment

    Instruments for this step

Equations and variables

  • Item

    95% 置信区间半宽

    Equation

    h = t · s / √n

    Variables and units

    t 临界值、标准差、样本量

    Assumptions and limits

    按定义单位代入;测量条件稳定

    Worked example

    示例值仅用于演示代入过程

Worked example

Input parameters

Assumed inputs for DC53 cold-work die steel under liquid helium -269 °C

Calculation

Substitute step by step and keep significant digits

Result

Produces a teaching value, not an acceptance value

Limitations

Example excludes systematic equipment bias

Deliverables

  • Raw records and processing sheet

  • Result and uncertainty

Errors and risks

  • Measuring before the environment stabilises

  • Treating one batch as process capability evidence

Instrument applicability

Organised around the Dimensional metrology & NDT family in the catalogue; confirm model capability and accessories.

Required external capabilities

Preparation, loading or analysis equipment outside this catalogue may be required.

Literature scope

Literature links indicate related methods or objects, not use of our instruments.

Instrument roles in the workflow

Instrument familyRole and applicabilityWorkflow steps

Performs a measurement or preparation step

Calibrate probe or transducer · Acquire points as planned

Performs a measurement or preparation step

Calibrate probe or transducer · Acquire points as planned

Performs a measurement or preparation step

Calibrate probe or transducer · Acquire points as planned

Language note

V9 结构化生成条目,发布前须由领域工程师复核技术细节。

Search terms

  • 检测方法

  • 标准规范

  • 选型方案

  • 科研流程

  • 模拟实验

Related instruments, methods and research

Paper links indicate related methods or objects; they do not establish use of this instrument model.

Your next research question. Let’s explore.

Tell us about your material, specimen and measurement goal.

Discuss your application ↗
Find your instrument
⌕
Search products, cases, solutions, standards and literature.