Grip drift correction under thermal cycling: complete workflow
Translation pending review.
Research track
performance
Research objective
Test plan for "Grip drift correction under thermal cycling". Specimens of monocrystalline silicon wafer are measured under thermal shock at 300 K/s following extreme-environment testing. The plan fixes sampling, measurement parameters, acceptance basis and record format, and reports creep rate and stress rupture strength with explicit limits of interpretation.
Objective
Obtain a reproducible creep rate and stress rupture strength under thermal shock at 300 K/s.
Required inputs
Specimen condition and batch
Calibration and range confirmation
Acceptance basis and record sheet
Workflow steps
- 01Title
Define the environment envelope and coupled fields
ActionTurn the task into verifiable measurands: state which standard or technical agreement defines %s, and fix the record fields.
InputOutput of the previous step and the environment log
OutputStep 1 record: creep rate and stress rupture strength
Quality gateThe acceptance basis traces to a standard clause or technical agreement
If the check failsInstruments for this stepReturn to this step and re-check inputs and equipment
- 02Title
Check thermal match of system and specimen
ActionPrepare specimens or measurement points for the material and purpose: confirm the temperature limits of furnace, grips, sensors and specimen, evacuate or purge and stabilise before loading, and control heating and cooling rates.
InputOutput of the previous step and the environment log
OutputStep 2 record: creep rate and stress rupture strength
Quality gateEnvironmental conditions and stabilisation time are logged continuously
If the check failsInstruments for this stepReturn to this step and re-check inputs and equipment
- 03Title
Establish vacuum or atmosphere
ActionVerify calibration status, fixtures and sensor ranges against the environmental envelope; complete the uncertainty budget before measuring.
InputOutput of the previous step and the environment log
OutputStep 3 record: creep rate and stress rupture strength
Quality gateRaw data, processing and the decision are reproducible
If the check failsInstruments for this stepReturn to this step and re-check inputs and equipment
- 04Title
Ramp and stabilise temperature
ActionExecute the fixed method with identical parameters; stabilise the environment within the specified time and log any abnormal condition separately.
InputOutput of the previous step and the environment log
OutputStep 4 record: creep rate and stress rupture strength
Quality gateThe acceptance basis traces to a standard clause or technical agreement
If the check failsInstruments for this stepReturn to this step and re-check inputs and equipment
- 05Title
Load and acquire multi-field signals
ActionJudge the main value, outliers and repeatability; keep raw records for any rejected point and state the basis instead of deleting it.
InputOutput of the previous step and the environment log
OutputStep 5 record: creep rate and stress rupture strength
Quality gateEnvironmental conditions and stabilisation time are logged continuously
If the check failsInstruments for this stepReturn to this step and re-check inputs and equipment
- 06Title
Assess environment-induced bias
ActionReport method, conditions, results, uncertainty and applicability limits; do not extrapolate beyond the tested environment.
InputOutput of the previous step and the environment log
OutputStep 6 record: creep rate and stress rupture strength
Quality gateRaw data, processing and the decision are reproducible
If the check failsInstruments for this stepReturn to this step and re-check inputs and equipment
Equations and variables
- Item
数值孔径
EquationNA = n · sinα
Variables and units介质折射率、孔径角
Assumptions and limits按定义单位代入;测量条件稳定
Worked example示例值仅用于演示代入过程
Worked example
Assumed inputs for monocrystalline silicon wafer under thermal shock at 300 K/s
Substitute step by step and keep significant digits
Produces a teaching value, not an acceptance value
Example excludes systematic equipment bias
Deliverables
Raw records and processing sheet
Result and uncertainty
Errors and risks
Measuring before the environment stabilises
Treating one batch as process capability evidence
Instrument applicability
Organised around the High-temperature & extreme environments family in the catalogue; confirm model capability and accessories.
Required external capabilities
Preparation, loading or analysis equipment outside this catalogue may be required.
Literature scope
Literature links indicate related methods or objects, not use of our instruments.
Instrument roles in the workflow
| Instrument family | Role and applicability | Workflow steps |
|---|---|---|
Performs a measurement or preparation step | Establish vacuum or atmosphere · Ramp and stabilise temperature | |
Performs a measurement or preparation step | Establish vacuum or atmosphere · Ramp and stabilise temperature |
Language note
V9 结构化生成条目,发布前须由领域工程师复核技术细节。
Search terms
检测方法
标准规范
选型方案
科研流程
模拟实验
