XRF non-destructive screening: complete workflow
Translation pending review.
Research track
dimension
Research objective
Test plan for "XRF non-destructive screening". Specimens of photovoltaic ribbon are measured under post-irradiation hot cell following compositional and thermal analysis. The plan fixes sampling, measurement parameters, acceptance basis and record format, and reports strain and displacement field with explicit limits of interpretation.
Objective
Obtain a reproducible strain and displacement field under post-irradiation hot cell.
Required inputs
Specimen condition and batch
Calibration and range confirmation
Acceptance basis and record sheet
Workflow steps
- 01Title
Fix the analyte or property
ActionTurn the task into verifiable measurands: state which standard or technical agreement defines %s, and fix the record fields.
InputOutput of the previous step and the environment log
OutputStep 1 record: strain and displacement field
Quality gateThe acceptance basis traces to a standard clause or technical agreement
If the check failsInstruments for this stepReturn to this step and re-check inputs and equipment
- 02Title
Sample and pre-treat
ActionPrepare specimens or measurement points for the material and purpose: build calibration and blanks, verify detection limit and drift, avoid contamination during digestion or preparation, and insert quality-control samples in each batch.
InputOutput of the previous step and the environment log
OutputStep 2 record: strain and displacement field
Quality gateEnvironmental conditions and stabilisation time are logged continuously
If the check failsInstruments for this stepReturn to this step and re-check inputs and equipment
- 03Title
Build calibration and QC
ActionVerify calibration status, fixtures and sensor ranges against the environmental envelope; complete the uncertainty budget before measuring.
InputOutput of the previous step and the environment log
OutputStep 3 record: strain and displacement field
Quality gateRaw data, processing and the decision are reproducible
If the check failsInstruments for this stepReturn to this step and re-check inputs and equipment
- 04Title
Measure per method
ActionExecute the fixed method with identical parameters; stabilise the environment within the specified time and log any abnormal condition separately.
InputOutput of the previous step and the environment log
OutputStep 4 record: strain and displacement field
Quality gateThe acceptance basis traces to a standard clause or technical agreement
If the check failsInstruments for this stepReturn to this step and re-check inputs and equipment
- 05Title
Check interference and LOD
ActionJudge the main value, outliers and repeatability; keep raw records for any rejected point and state the basis instead of deleting it.
InputOutput of the previous step and the environment log
OutputStep 5 record: strain and displacement field
Quality gateEnvironmental conditions and stabilisation time are logged continuously
If the check failsInstruments for this stepReturn to this step and re-check inputs and equipment
- 06Title
Compute content and report
ActionReport method, conditions, results, uncertainty and applicability limits; do not extrapolate beyond the tested environment.
InputOutput of the previous step and the environment log
OutputStep 6 record: strain and displacement field
Quality gateRaw data, processing and the decision are reproducible
If the check failsInstruments for this stepReturn to this step and re-check inputs and equipment
Equations and variables
- Item
PID 输出
Equationu = K_p e + K_i ∫e dt + K_d de/dt
Variables and units比例系数、当前误差、积分系数、误差积分、微分系数、误差变化率
Assumptions and limits按定义单位代入;测量条件稳定
Worked example示例值仅用于演示代入过程
Worked example
Assumed inputs for photovoltaic ribbon under post-irradiation hot cell
Substitute step by step and keep significant digits
Produces a teaching value, not an acceptance value
Example excludes systematic equipment bias
Deliverables
Raw records and processing sheet
Result and uncertainty
Errors and risks
Measuring before the environment stabilises
Treating one batch as process capability evidence
Instrument applicability
Organised around the Composition & physical analysis family in the catalogue; confirm model capability and accessories.
Required external capabilities
Preparation, loading or analysis equipment outside this catalogue may be required.
Literature scope
Literature links indicate related methods or objects, not use of our instruments.
Instrument roles in the workflow
| Instrument family | Role and applicability | Workflow steps |
|---|---|---|
Performs a measurement or preparation step | Build calibration and QC · Measure per method | |
Performs a measurement or preparation step | Build calibration and QC · Measure per method | |
Performs a measurement or preparation step | Build calibration and QC · Measure per method |
Language note
V9 结构化生成条目,发布前须由领域工程师复核技术细节。
Search terms
检测方法
标准规范
选型方案
科研流程
模拟实验
