棱镜耦合仪系列 — Sampling and filtering in photoelectric autocollimation
A schematic of the measurement chain, not device footage or data.
Schematic demonstration: scale, speed and colour do not represent instrument measurements.
Translation pending review.
Instrument role
Measurement and analysis
Operating principle
For this task the 棱镜耦合仪系列 family measures as follows: Sampling and filtering in photoelectric autocollimation. The general relation and its conditions are given below; confirm force, travel, resolution and accessories for a specific model.
τ = F / A
- Symbol
F
ItemShear force
UnitN
- Symbol
A
ItemShear area
Unitmm²
Conditions are stable and calibrated as defined
Inputs are independent without unmodelled bias
Interpretation stays within this family and the stated conditions
Research objects
Research object: AZ91D magnesium alloy
Research object: ZTA zirconia-toughened alumina
Research object: Si3N4 silicon nitride ceramic
Research questions
What dominates the error budget for Sampling and filtering in photoelectric autocollimation?
Does the conclusion hold for another batch or process?
Applications
Sampling and filtering in photoelectric autocollimation: AZ91D magnesium alloy
Sampling and filtering in photoelectric autocollimation: ZTA zirconia-toughened alumina
From specimen to result
- 01Title
Establish the datum and coordinate frame
ActionTurn the task into verifiable measurands: state which standard or technical agreement defines %s, and fix the record fields.
InputPrevious output
OutputStep 1 record
Quality gateThe acceptance basis traces to a standard clause or technical agreement
If the check failsInstruments for this stepReturn and re-check
- 02Title
Set the mirror and targets
ActionPrepare specimens or measurement points for the material and purpose: clean and thermally soak the datum, place the mirror or target along the travel, verify zero and bidirectional repeatability, then step at equal intervals.
InputPrevious output
OutputStep 2 record
Quality gateEnvironmental conditions and stabilisation time are logged continuously
If the check failsInstruments for this stepReturn and re-check
- 03Title
Verify zero and repeatability
ActionVerify calibration status, fixtures and sensor ranges against the environmental envelope; complete the uncertainty budget before measuring.
InputPrevious output
OutputStep 3 record
Quality gateRaw data, processing and the decision are reproducible
If the check failsInstruments for this stepReturn and re-check
- 04Title
Acquire angle or displacement in steps
ActionExecute the fixed method with identical parameters; stabilise the environment within the specified time and log any abnormal condition separately.
InputPrevious output
OutputStep 4 record
Quality gateThe acceptance basis traces to a standard clause or technical agreement
If the check failsInstruments for this stepReturn and re-check
- 05Title
Fit straightness and angular error
ActionJudge the main value, outliers and repeatability; keep raw records for any rejected point and state the basis instead of deleting it.
InputPrevious output
OutputStep 5 record
Quality gateEnvironmental conditions and stabilisation time are logged continuously
If the check failsInstruments for this stepReturn and re-check
- 06Title
Assess environment and uncertainty
ActionReport method, conditions, results, uncertainty and applicability limits; do not extrapolate beyond the tested environment.
InputPrevious output
OutputStep 6 record
Quality gateRaw data, processing and the decision are reproducible
If the check failsInstruments for this stepReturn and re-check
Methods and standards
small-angle and straightness measurement
Confirm force, range and threshold against the applicable standard
Standards and applicability
ISO 10110-1:2019
Configuration and service checks
Calibration and intermediate check records
Fixtures, accessories and range confirmation
Limitations
Family-level guidance, not a specific model capability
Re-confirm method and criteria outside the stated conditions
Search terms
自准直仪
几何计量
精密运动控制
光学计量
角度计量
Related instruments, methods and research
Paper links indicate related methods or objects; they do not establish use of this instrument model.
Relation commonly used for this task
