SHANGHAI MICROCRE OPTICS-MECH TECH CO., LTDAbout MICROCRE400-812-7833
MICROCRE · RESEARCH SCIENCE

偏光与荧光显微镜 — Phase fraction by area analysis

A schematic of the measurement chain, not device footage or data.

Schematic demonstration: scale, speed and colour do not represent instrument measurements.

Translation pending review.

Instrument role

Measurement and analysis

Operating principle

Principle summary

For this task the 偏光与荧光显微镜 family measures as follows: Phase fraction by area analysis. The general relation and its conditions are given below; confirm force, travel, resolution and accessories for a specific model.

Equation

σ_c = K_IC / (Y√(πa))

Variables and units
  • Symbol

    KIC

    Item

    Fracture toughness

    Unit

    MPa·m^0.5

  • Symbol

    Y

    Item

    Geometry factor

    Unit

    1

  • Symbol

    a

    Item

    Crack length

    Unit

    mm

Assumptions and limits
  • Conditions are stable and calibrated as defined

  • Inputs are independent without unmodelled bias

  • Interpretation stays within this family and the stated conditions

Research objects

  • Research object: C/C composite

  • Research object: Cf/SiC ceramic matrix composite

  • Research object: carbon-fibre epoxy laminate

Research questions

  • What dominates the error budget for Phase fraction by area analysis?

  • Does the conclusion hold for another batch or process?

Applications

  • Phase fraction by area analysis: 40Cr alloy structural steel

  • Phase fraction by area analysis: GCr15 bearing steel

From specimen to result

  1. 01
    Title

    Fix the purpose and magnification

    Action

    Turn the task into verifiable measurands: state which standard or technical agreement defines %s, and fix the record fields.

    Input

    Previous output

    Output

    Step 1 record

    Quality gate

    The acceptance basis traces to a standard clause or technical agreement

    If the check fails

    Return and re-check

    Instruments for this step
  2. 02
    Title

    Prepare and clean the surface

    Action

    Prepare specimens or measurement points for the material and purpose: select the objective by magnification and working distance, calibrate the scale and white balance, avoid clipping, and compare quantitatively under identical illumination and thresholds.

    Input

    Previous output

    Output

    Step 2 record

    Quality gate

    Environmental conditions and stabilisation time are logged continuously

    If the check fails

    Return and re-check

    Instruments for this step
  3. 03
    Title

    Calibrate scale and illumination

    Action

    Verify calibration status, fixtures and sensor ranges against the environmental envelope; complete the uncertainty budget before measuring.

    Input

    Previous output

    Output

    Step 3 record

    Quality gate

    Raw data, processing and the decision are reproducible

    If the check fails

    Return and re-check

    Instruments for this step
  4. 04
    Title

    Capture representative images

    Action

    Execute the fixed method with identical parameters; stabilise the environment within the specified time and log any abnormal condition separately.

    Input

    Previous output

    Output

    Step 4 record

    Quality gate

    The acceptance basis traces to a standard clause or technical agreement

    If the check fails

    Return and re-check

    Instruments for this step
  5. 05
    Title

    Segment and measure with thresholds

    Action

    Judge the main value, outliers and repeatability; keep raw records for any rejected point and state the basis instead of deleting it.

    Input

    Previous output

    Output

    Step 5 record

    Quality gate

    Environmental conditions and stabilisation time are logged continuously

    If the check fails

    Return and re-check

    Instruments for this step
  6. 06
    Title

    Review statistics and report

    Action

    Report method, conditions, results, uncertainty and applicability limits; do not extrapolate beyond the tested environment.

    Input

    Previous output

    Output

    Step 6 record

    Quality gate

    Raw data, processing and the decision are reproducible

    If the check fails

    Return and re-check

    Instruments for this step

Methods and standards

  • microscopic observation and image measurement

  • Confirm force, range and threshold against the applicable standard

Configuration and service checks

  • Calibration and intermediate check records

  • Fixtures, accessories and range confirmation

Limitations

  • Family-level guidance, not a specific model capability

  • Re-confirm method and criteria outside the stated conditions

Search terms

  • 显微成像

  • DIC

  • 散斑

  • 离子束

  • 电子束

  • 芯片测试

  • 显微分析

Related instruments, methods and research

Relation commonly used for this task

Your next research question. Let’s explore.

Tell us about your material, specimen and measurement goal.

Discuss your application ↗
Find your instrument
⌕
Search products, cases, solutions, standards and literature.