超高温与原位压痕 — Strength retention of Cf/SiC at high temperature
A schematic of the measurement chain, not device footage or data.
Schematic demonstration: scale, speed and colour do not represent instrument measurements.
Translation pending review.
Instrument role
Measurement and analysis
Operating principle
For this task the 超高温与原位压痕 family measures as follows: Strength retention of Cf/SiC at high temperature. The general relation and its conditions are given below; confirm force, travel, resolution and accessories for a specific model.
h_f / h_max = 1 − ε·P/(S·h_max)
- Symbol
eps
ItemGeometric factor
Unit1
- Symbol
pmax
ItemPeak load
UnitmN
- Symbol
S
ItemContact stiffness
UnitmN/nm
- Symbol
hmax
ItemMaximum depth
Unitnm
Conditions are stable and calibrated as defined
Inputs are independent without unmodelled bias
Interpretation stays within this family and the stated conditions
Research objects
Research object: 2205 duplex stainless steel
Research object: TC4 titanium alloy
Research object: TA15 titanium alloy
Research questions
What dominates the error budget for Strength retention of Cf/SiC at high temperature?
Does the conclusion hold for another batch or process?
Applications
Strength retention of Cf/SiC at high temperature: 2205 duplex stainless steel
Strength retention of Cf/SiC at high temperature: TC4 titanium alloy
From specimen to result
- 01Title
Define the environment envelope and coupled fields
ActionTurn the task into verifiable measurands: state which standard or technical agreement defines %s, and fix the record fields.
InputPrevious output
OutputStep 1 record
Quality gateThe acceptance basis traces to a standard clause or technical agreement
If the check failsInstruments for this stepReturn and re-check
- 02Title
Check thermal match of system and specimen
ActionPrepare specimens or measurement points for the material and purpose: confirm the temperature limits of furnace, grips, sensors and specimen, evacuate or purge and stabilise before loading, and control heating and cooling rates.
InputPrevious output
OutputStep 2 record
Quality gateEnvironmental conditions and stabilisation time are logged continuously
If the check failsInstruments for this stepReturn and re-check
- 03Title
Establish vacuum or atmosphere
ActionVerify calibration status, fixtures and sensor ranges against the environmental envelope; complete the uncertainty budget before measuring.
InputPrevious output
OutputStep 3 record
Quality gateRaw data, processing and the decision are reproducible
If the check failsInstruments for this stepReturn and re-check
- 04Title
Ramp and stabilise temperature
ActionExecute the fixed method with identical parameters; stabilise the environment within the specified time and log any abnormal condition separately.
InputPrevious output
OutputStep 4 record
Quality gateThe acceptance basis traces to a standard clause or technical agreement
If the check failsInstruments for this stepReturn and re-check
- 05Title
Load and acquire multi-field signals
ActionJudge the main value, outliers and repeatability; keep raw records for any rejected point and state the basis instead of deleting it.
InputPrevious output
OutputStep 5 record
Quality gateEnvironmental conditions and stabilisation time are logged continuously
If the check failsInstruments for this stepReturn and re-check
- 06Title
Assess environment-induced bias
ActionReport method, conditions, results, uncertainty and applicability limits; do not extrapolate beyond the tested environment.
InputPrevious output
OutputStep 6 record
Quality gateRaw data, processing and the decision are reproducible
If the check failsInstruments for this stepReturn and re-check
Methods and standards
extreme-environment testing
Confirm force, range and threshold against the applicable standard
Standards and applicability
GB/T 21838.1-2008
GB/T 21838.2-2008
GB/T 10592-2023
GB/T 2423.22-2012
GJB 150.3A-2009
Configuration and service checks
Calibration and intermediate check records
Fixtures, accessories and range confirmation
Limitations
Family-level guidance, not a specific model capability
Re-confirm method and criteria outside the stated conditions
Search terms
真空
超真空
真空热循环
热冲击
高温高压
液氮
液氦
氧化腐蚀
高温氧化
多气氛
空间环境
深空
航空航天
多物理场
SHPB
霍普金森
高速疲劳
卫星
空间发动机
辐射
低温力学
燃气腐蚀
Related instruments, methods and research
Relation commonly used for this task
