Product Description:
Shore hardness tester rubber vulcanized rubber and plastic products to determine the hardness of the instrument, and the instrument has A-type, D-type, C-type three forms.Type A and D are suitable for testing low - medium hardness and high hardness materials respectively.The C type is suitable for the compression of 50 %, the stress 0.049 MPa, the use of rubber and plastic, the test of the hardness of the microporous material used in the shoes made of foaming agent in plastic.
The hardness of the implementation of GB / T531-99, GB2411-80, HG / T2489-93, JJG304-2003 the relevant provisions.
Product features:
The type A is suitable for general rubber, synthetic rubber, soft rubber, polyfat, leather and wax, etc., can be used for the matching of HLXS-A/C fixed support bracket.
The C type is suitable for rubber and plastic and the microporous material made of foaming agent in plastic. It can be used for the matching of HLXS-A/C fixed support bracket.
Type D is applicable to general hard rubber, resin, acrylic, glass, thermoplastic rubber, printing plate, such as, an optional HLXS - D on lotus support systems. In line with the standard DIN53505, ASTMD2240, JISR7215
Technical parameters:
LXS-A     
1. Scale value: 0-100HA 
2. Measurement error: 20HA~90HA, HA≤±1HA
3. Pressure needle stroke: 0-2.5mm
4. The end of the pressure needle value: （A）0.55N-8.06N
5. Power: 1×1.55v button battery
6. Resolution:0.5HA
LXS-D 
1. Scale value: 0-100HD 
2. Measurement error: 20HD~90HD, HD≤±1HD
3. Pressure needle stroke: 0-2.5mm
4. The end of the pressure needle value: （D）0-44.5N
5. Power: 1×1.55v button battery
6. Resolution:0.5HD
LXS-C
1. Scale value: 0-100HW 
2. Measurement error: 20HW~90HW, HC≤±1HW
3. Pressure needle stroke: 0-2.5mm
4. The end of the pressure needle value: （C）0.55N-8.06N
5. Power: 1×1.55v button battery