MICROCRE · RESEARCH SCIENCE
聚合物、水凝胶与填充体系
研究目标
以热历史、含水状态、时间和温度为核心变量,解释结构与黏弹响应,防止把测试条件变化归于材料配方。
研究问题
调理和储存状态是否在比较组间一致?
热曲线中的熔融、冷结晶与基线能否可靠区分?
接触力、加载速率或温度是否改变了被测响应?
组织与性能的关系
结晶度计算需要适用参考焓与聚合物质量分数,填料和冷结晶必须处理。
黏弹材料对时程敏感,短时硬度或拉伸不能直接预测长期蠕变。
软表面可能被测头压陷或制样改变,需验证测量本身的扰动。
适用边界
不同标尺及加载时程的结果不自动等价。
材料层面的表征不替代生物相容性或产品服役评价。
关联仪器、方法与研究依据
聚合物:热历史、结构与黏弹响应 →表面粗糙度:方向、滤波与功能联系 →薄壁件:厚度、接触变形与内腔 →压缩性能:端面、摩擦与失稳检查 →环境耐久:暴露条件、前后对照与外推限制 →冲击性能:缺口、温度与吸收能量 →热物性:扩散率、热容与密度一致性 →
论文关联表示方法或研究对象相关,不表示论文采用了本型号仪器。
Orientation imaging: The emergence of a new microscopy →The impact of magnesium content on lithium-magnesium alloy electrode performance with argyrodite solid electrolyte →Microstructure Analysis for Additive Manufacturing: A Review of Existing Standards →Limit case analysis of the “stable indenter velocity” method for obtaining creep stress exponents from constant load indentation creep tests →Investigation of creep behaviour under load during indentation experiments and its influence on hardness and modulus results →Using nanoindentation to study the aging of cellulose acetate in cinematographic films →A procedure for extracting primary and secondary creep parameters from nanoindentation data →Size-affected single-slip behavior of pure nickel microcrystals →A method for interpreting the data from depth-sensing indentation instruments →Development of Reference Material 8103: Adamantane for Subambient DSC Temperature and Enthalpy Calibration →Certification of Standard Reference Material® 2232a: Indium for DSC Temperature and Enthalpy Calibration →Investigation of complementary use of optical metrology and x-ray computed tomography for surface finish in laser powder bed fusion additive manufacturing →Temperature dependence of the indentation size effect →A novel approach for extending autocollimator calibration from plane to spatial angles →A critical appraisal of the extraction of creep parameters from nanoindentation data obtained at room temperature →Size dependence of mechanical properties of gold at the micron scale in the absence of strain gradients →Infrared Optical Properties of Materials →Anisotropy oxidation behavior and mechanism of textured Ti3(SiAl)C2 ceramic →Establishing isothermal contact at a known temperature under thermal equilibrium in elevated temperature instrumented indentation testing →Evaluation of measurement data — Guide to the expression of uncertainty in measurement →Evaluation of measurement data — Guide to the expression of uncertainty in measurement. Amendment 1: Nonlinearity in measurement models →Evaluation of measurement data — Supplement 1 to the GUM — Propagation of distributions using a Monte Carlo method →Guide to the expression of uncertainty in measurement — Part 6: Developing and using measurement models →Transmission EBSD from 10 nm domains in a scanning electron microscope →Indentation power-law creep of high-purity indium →An improved long-term nanoindentation creep testing approach for studying the local deformation processes in nanocrystalline metals at room and elevated temperatures →Guidelines for Evaluating and Expressing the Uncertainty of NIST Measurement Results →Indentation size effects in crystalline materials: A law for strain gradient plasticity →An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments →Traceability Calibration, & Measurement Uncertainty Issues Regarding Coordinate Measuring Machines and Other Complex Instruments →Discrepancies between roughness measurements obtained with phase-shifting and white-light interferometry →Strategies for Transmission Electron Microscopy Specimen Preparation of Polymer Composites →Surface characterization of an ultra-soft contact lens material using an atomic force microscopy nanoindentation method →Comparison of Bulk and Micro Sampling Techniques for the Elemental Analysis of SRM 610 and 612 →High-Temperature Mechanical Characterization of CeO2 as a Ceramic Surrogate Fuel Based on FIB and Nanoindentation →AFM z-piezo calibration method for height measurements in the sub-nanometer to nanometer range using stepped surfaces →Hot nanoindentation in inert environments →Sample dimensions influence strength and crystal plasticity →Certification of Standard Reference Material® 2246a Relative Intensity Correction Standard for Raman Spectroscopy: 830 nm Excitation →NIST Surface Roughness and Step Height Calibrations: Measurement Conditions and Sources of Uncertainty →Mechanical Metallurgy on Columbia Gas X100 Experimental Pipe →Elevated temperature, in situ indentation with calibrated contact temperatures →High-resolution elastic strain measurement from electron backscatter diffraction patterns: new levels of sensitivity →EURAMET Calibration Guide — 硬度计校准与不确定度评定 →ISO Technical Committee Guidance — 热分析曲线的可比性 →NPL Good Practice Guide — 不确定度预算的编制 →Evaluation of measurement data — Guide to the expression of uncertainty in measurement (GUM) →Thermal Analysis →
