MICROCRE · RESEARCH SCIENCE
Передовая и многофазная керамика
Перевод ожидает проверки.
Цель исследования
Свяжите поры, зёрна, фазы и поверхность с хрупким разрушением, различая твёрдость, прочность и вязкость.
Научные вопросы
致密化改善是否同时改变晶粒、第二相和缺陷分布?
抛光拉出与真实孔隙是否被可靠地区分?
强度分散与表面加工、试样体积或局部缺陷之间有何证据?
Связь структуры и свойств
相对密度需要适用组成和体积定义,不能独自预测强度。
硬度反映局部压入响应,裂纹形貌与适用模型决定能否进行断裂参数讨论。
弯曲受拉面及尺寸影响失效概率,局部图像和少量高值不代表整批可靠性。
Ограничения
压痕裂纹经验式不自动等同标准断裂韧度测定。
二维孔隙和晶粒统计不能无模型直接转为三维结构。
Связанные приборы, методы и исследования
Металлографическая резка →Электронные испытательные машины →Высокотемпературное индентирование →Металлографические микроскопы →Прессы для запрессовки →Шлифование и полирование →Твердомеры Виккерса →
Передовая керамика: плотность, структура и механика →Базовые плоскости: плоскостность, прямолинейность и опоры →Размеры микроструктуры: зёрна, фазы и поры →Углы оптических элементов и цепь юстировки →Размеры частиц: отбор, проекция и форма →Сжатие: торцы, трение и устойчивость →Изгиб: геометрия, опоры и статистика разрушения →Высокотемпературные свойства: равновесие, дрейф и время →Твёрдость и вдавливание: шкала и модель контакта →Теплофизика: температуропроводность, теплоёмкость и плотность →
Металлографическая резка →Электронные испытательные машины →Высокотемпературное индентирование →Металлографические микроскопы →Прессы для запрессовки →Шлифование и полирование →Твердомеры Виккерса →
Связь со статьёй означает общность метода или объекта, а не применение данной модели прибора.
Orientation imaging microscopy: application to the measurement of grain boundary structure →Orientation imaging: The emergence of a new microscopy →A Critical Evaluation of Indentation Techniques for Measuring Fracture Toughness: I, Direct Crack Measurements →The impact of magnesium content on lithium-magnesium alloy electrode performance with argyrodite solid electrolyte →Influences of pileup on the measurement of mechanical properties by load and depth sensing indentation techniques →Certification of Standard Reference Material® 2261a: Chlorinated Pesticides in Hexane (Nominal Mass Concentration 2 µg/mL) →Limit case analysis of the “stable indenter velocity” method for obtaining creep stress exponents from constant load indentation creep tests →Scaling approach to conical indentation in elastic-plastic solids with work hardening →Investigation of creep behaviour under load during indentation experiments and its influence on hardness and modulus results →Novel high temperature vacuum nanoindentation system with active surface referencing and non-contact heating for measurements up to 800 °C →Using nanoindentation to study the aging of cellulose acetate in cinematographic films →Computational modeling of the forward and reverse problems in instrumented sharp indentation →A procedure for extracting primary and secondary creep parameters from nanoindentation data →Size-affected single-slip behavior of pure nickel microcrystals →A method for interpreting the data from depth-sensing indentation instruments →Nanohardness and indentation fracture resistance of dual-phase high-entropy ceramic →Fracture Toughness Determinations by Indentation →High temperature nanoindentation – the importance of isothermal contact →Development of Reference Material 8103: Adamantane for Subambient DSC Temperature and Enthalpy Calibration →Certification of Standard Reference Material® 2232a: Indium for DSC Temperature and Enthalpy Calibration →Temperature dependence of the indentation size effect →The Measurement and Uncertainty of a Calibration Standard for the Scanning Electron Microscope →Distance-dependent influences on angle metrology with autocollimators in deflectometry →Environmental influences on autocollimator-based angle and form metrology →Self-calibration strategies for reducing systematic slope measurement errors of autocollimators in deflectometric profilometry →A novel approach for extending autocollimator calibration from plane to spatial angles →A critical appraisal of the extraction of creep parameters from nanoindentation data obtained at room temperature →Size dependence of mechanical properties of gold at the micron scale in the absence of strain gradients →Infrared Optical Properties of Materials →Anisotropy oxidation behavior and mechanism of textured Ti3(SiAl)C2 ceramic →Establishing isothermal contact at a known temperature under thermal equilibrium in elevated temperature instrumented indentation testing →A simple method for high-precision calibration of an angle encoder using an electronic nulling autocollimator →Evaluation of measurement data — Guide to the expression of uncertainty in measurement →Evaluation of measurement data — Guide to the expression of uncertainty in measurement. Amendment 1: Nonlinearity in measurement models →Evaluation of measurement data — Supplement 1 to the GUM — Propagation of distributions using a Monte Carlo method →Guide to the expression of uncertainty in measurement — Part 6: Developing and using measurement models →Transmission EBSD from 10 nm domains in a scanning electron microscope →Elastic/Plastic Indentation Damage in Ceramics: The Median/Radial Crack System →Indentation power-law creep of high-purity indium →An improved long-term nanoindentation creep testing approach for studying the local deformation processes in nanocrystalline metals at room and elevated temperatures →Guidelines for Evaluating and Expressing the Uncertainty of NIST Measurement Results →Indentation size effects in crystalline materials: A law for strain gradient plasticity →An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments →On the generality of the relationship among contact stiffness, contact area, and elastic modulus during indentation →Traceability Calibration, & Measurement Uncertainty Issues Regarding Coordinate Measuring Machines and Other Complex Instruments →Nanoindentation of B4C-HfB2 particulate ceramic composite doped with Cr–B compounds →Fiji: an open-source platform for biological-image analysis →NIH Image to ImageJ: 25 years of image analysis →Quantitative insight into dislocation nucleation from high-temperature nanoindentation experiments →Nanoindentation and contact-mode imaging at high temperatures →Surface characterization of an ultra-soft contact lens material using an atomic force microscopy nanoindentation method →Comparison of Bulk and Micro Sampling Techniques for the Elemental Analysis of SRM 610 and 612 →Deformation mechanism and mechanical properties of TiN/ZrN nanolaminates by nanoindentation: effect of layer thickness and temperature →High-Temperature Mechanical Characterization of CeO2 as a Ceramic Surrogate Fuel Based on FIB and Nanoindentation →Thermally Activated Deformation Mechanisms in MgO Investigated via High Temperature Scanning Indentation →AFM z-piezo calibration method for height measurements in the sub-nanometer to nanometer range using stepped surfaces →Uncertainties in Small-Angle Measurement Systems Used to Calibrate Angle Artifacts →Hot nanoindentation in inert environments →Sample dimensions influence strength and crystal plasticity →Certification of Standard Reference Material® 2246a Relative Intensity Correction Standard for Raman Spectroscopy: 830 nm Excitation →NIST Surface Roughness and Step Height Calibrations: Measurement Conditions and Sources of Uncertainty →Uncovering dominant mechanisms of nano-mechanical properties of AlTaO4 ceramics from structural characteristics →Mechanical Metallurgy on Columbia Gas X100 Experimental Pipe →Elevated temperature, in situ indentation with calibrated contact temperatures →High-resolution elastic strain measurement from electron backscatter diffraction patterns: new levels of sensitivity →A systematic study of sample preparation-induced martensitic phase formation in 304 L austenitic stainless steel →ISO Technical Committee Guidance — 热分析曲线的可比性 →Scanning Electron Microscopy and X-ray Microanalysis →Thermal Analysis →
