Angle of twist
This entry gives the definition, variables, assumptions and a reproducible example for Angle of twist. The equation holds only under the stated assumptions.
Derivation
Write inputs and outputs by definition and convert to the unit system required by the equation.
Check dimensional consistency, then judge whether the result is physically plausible.
Common pitfalls
Extrapolating an empirical equation beyond validated materials or conditions
Mixing unit systems without conversion
Assumptions
- • Inputs are independent and measured as defined
- • Conditions are stable without unmodelled bias
- • Units and magnitudes stay within the valid range
Illustrative example
Example inputs: Torque=20000 N·mm; Length=500 mm; Shear modulus=79000 MPa; Polar moment=15708 mm⁴
Substitute and keep significant digits.
See the default result in the linked calculator; values are illustrative.
Equation
θ = TL / (GJ) · 180/π
Symbols & units
| T | Torque | N·mm |
|---|---|---|
| L | Length | mm |
| G | Shear modulus | MPa |
| J | Polar moment | mm⁴ |
Related instruments & resources
Links support navigation and do not establish a model’s performance or standards compliance.
