Stoney film stress
This entry gives the definition, variables, assumptions and a reproducible example for Stoney film stress. The equation holds only under the stated assumptions.
Derivation
Write inputs and outputs by definition and convert to the unit system required by the equation.
Check dimensional consistency, then judge whether the result is physically plausible.
Common pitfalls
Extrapolating an empirical equation beyond validated materials or conditions
Mixing unit systems without conversion
Assumptions
- • Inputs are independent and measured as defined
- • Conditions are stable without unmodelled bias
- • Units and magnitudes stay within the valid range
Illustrative example
Example inputs: Substrate modulus=130 GPa; Substrate thickness=500 µm; Substrate Poisson=0.28 1; Film thickness=200 nm; Radius of curvature=12 m
Substitute and keep significant digits.
See the default result in the linked calculator; values are illustrative.
Equation
σ = E_s h_s² / [6(1−ν_s) h_f R]
Symbols & units
| Es | Substrate modulus | GPa |
|---|---|---|
| hs | Substrate thickness | µm |
| nus | Substrate Poisson | 1 |
| hf | Film thickness | nm |
| R | Radius of curvature | m |
Related instruments & resources
Links support navigation and do not establish a model’s performance or standards compliance.
