Proof strength Rp0.2 interpolation
This entry gives the definition, variables, assumptions and a reproducible example for Proof strength Rp0.2 interpolation. The equation holds only under the stated assumptions.
Derivation
Write inputs and outputs by definition and convert to the unit system required by the equation.
Check dimensional consistency, then judge whether the result is physically plausible.
Common pitfalls
Extrapolating an empirical equation beyond validated materials or conditions
Mixing unit systems without conversion
Assumptions
- • Inputs are independent and measured as defined
- • Conditions are stable without unmodelled bias
- • Units and magnitudes stay within the valid range
Illustrative example
Example inputs: Lower stress=350 MPa; Lower strain=0.15 %; Upper stress=365 MPa; Upper strain=0.25 %
Substitute and keep significant digits.
See the default result in the linked calculator; values are illustrative.
Equation
R_p0.2 = σ₁ + (0.2 − ε₁)/(ε₂ − ε₁) · (σ₂ − σ₁)
Symbols & units
| s1 | Lower stress | MPa |
|---|---|---|
| e1 | Lower strain | % |
| s2 | Upper stress | MPa |
| e2 | Upper strain | % |
Related instruments & resources
Links support navigation and do not establish a model’s performance or standards compliance.
