CALCULATORS
Residual depth ratio
Computes Residual depth ratio from the definition. Units are stated on the page; results support teaching and analytical checks, not standard testing.
Assumptions
- • 输入量按定义测量
- • 条件稳定且无未建模系统偏差
- • 单位与量级在适用范围内
Equation
h_f / h_max = 1 − ε·P/(S·h_max)
Variables & units
| Variable | Unit | Description |
|---|---|---|
| 几何系数 Geometric factor | 1 | |
| 峰值载荷 Peak load | mN | |
| 接触刚度 Contact stiffness | mN/nm | |
| 最大深度 Maximum depth | nm |
Controlled reference calculation
Outputs & units
- h_f/h_max h_f/h_max · 1
