SHANGHAI MICROCRE OPTICS-MECH TECH CO., LTDAbout MICROCRE400-812-7833
CALCULATORS

Oliver–Pharr contact depth

Translation pending review.

由峰值载荷、最大深度与初始卸载刚度估计压头和试样接触的深度。接触深度不是残余压痕深度;后续应把它输入经过标定的压头面积函数。以下仅复算已得到的刚度,不替代卸载曲线拟合。

Assumptions

  • • 卸载初段主要表现为弹性恢复,接触零点、漂移与机架柔度已经妥善处理。
  • • 默认 ε=0.75 只是常用教学取值;应依据压头几何、卸载模型与方法文件确认。
  • • 明显堆积、开裂、相变、黏弹性及强烈蠕变时不能直接套用。

Equation

h_c = h_max − ε P_max / S

Variables & units

VariableUnitDescription
最大深度 h_maxnm
峰值载荷 P_maxmN
卸载刚度 SmN/nm
几何系数 ε1

Controlled reference calculation

This tool uses a verified fixed algorithm; editing explanatory text does not change its computation. Inputs and results are reference calculations subject to the stated assumptions.

Input and result labels retain their reviewed source language.

Preparing the reference calculation. If scripts are unavailable, verify the equation manually.

Outputs & units

  • 接触深度 h_c · nm
  • 表面弹性位移 h_s · nm

Oliver–Pharr contact depth →

Your next research question. Let’s explore.

Tell us about your material, specimen and measurement goal.

Discuss your application ↗
Find your instrument
⌕
Search products, cases, solutions, standards and literature.