SHANGHAI MICROCRE OPTICS-MECH TECH CO., LTDAbout MICROCRE400-812-7833
METHODS

Temperature compensation and CTE correction: method essentials and limits

Test plan for "Temperature compensation and CTE correction". Specimens of C/C composite are measured under controlled 23±2 °C / 50±5 %RH following dimensional measurement and flaw detection. The plan fixes sampling, measurement parameters, acceptance basis and record format, and reports grain size and phase fraction with explicit limits of interpretation.

Reporting requirements

Method name and standard edition

Sampling location, specimen condition and count

Environment, equipment and calibration status

Result, dispersion, uncertainty and decision

Common misconceptions

Reusing historical data from a similar material while ignoring batch and process differences

Reporting only a mean value without dispersion, repeatability or uncertainty

Workflow & steps

01

Read the drawing, datum and tolerance

Turn the task into verifiable measurands: state which standard or technical agreement defines %s, and fix the record fields.

02

Clean and thermally soak the part

Prepare specimens or measurement points for the material and purpose: soak to 20 °C and clean the surface, establish the datum and frame, calibrate the probe, then choose points and evaluation rules from the drawing.

03

Calibrate probe or transducer

Verify calibration status, fixtures and sensor ranges against the environmental envelope; complete the uncertainty budget before measuring.

04

Acquire points as planned

Execute the fixed method with identical parameters; stabilise the environment within the specified time and log any abnormal condition separately.

05

Fit features and evaluate tolerance

Judge the main value, outliers and repeatability; keep raw records for any rejected point and state the basis instead of deleting it.

06

Review outliers and report

Report method, conditions, results, uncertainty and applicability limits; do not extrapolate beyond the tested environment.

Checks

  • • The acceptance basis traces to a standard clause or technical agreement
  • • Environmental conditions and stabilisation time are logged continuously
  • • Raw data, processing and the decision are reproducible

Illustrative example

Teaching example: use C/C composite measured under controlled 23±2 °C / 50±5 %RH to show the record format and decision flow; values are assumed, not customer measurements.

Related instruments & resources

Links support navigation and do not establish a model’s performance or standards compliance.

Your next research question. Let’s explore.

Tell us about your material, specimen and measurement goal.

Discuss your application ↗
Find your instrument
⌕
Search products, cases, solutions, standards and literature.