SHANGHAI MICROCRE OPTICS-MECH TECH CO., LTDAbout MICROCRE400-812-7833
METHODS

Autocollimation: from reflected light to geometric error

An autocollimator measures small tilts from image displacement after a collimated beam returns from a reflector. It supports optomechanical alignment and geometric metrology. Its direct measurand is angle; straightness and flatness also depend on the mirror base, measurement path and processing. Angular resolution alone is not system-level form accuracy.

Theory & worked calculations

Item

Translation pending review.

自准直测角:1角秒对应多大高度差:模型与量纲

Equation

θrad=θarcsec×π/(180×3600);Δh=1000Ltanθrad

Variables & dimensions

Translation pending review.

基长L=100 mm;镜面倾角θ=1 arcsec

Assumptions & limits

Translation pending review.

该式是刚性基座几何关系,不包括形变、测点不等距或测量轴耦合,也不是对某台自准直仪准确度的证明。

Worked example

Translation pending review.

假设输入演算:1×π/648000 = 5e-06 rad;1000×100×tan(π/648000) = 0.484814 µm。单步约0.484814 µm。把已换算的镜面倾角再次除以2会得到一半结果,这是常见量纲/定义错误。实际直线度还受基座、反射镜、空气扰动和角度零点影响。

Reporting requirements

Translation pending review.

以试样编号关联原始图像、测量序列、设备配置及方法版本。

Translation pending review.

分别报告重复性、异常处理及本模型未覆盖的影响因素,不用演算示例替代实测。

Common misconceptions

Translation pending review.

角度分辨率不是系统准确度,测点基长、基准线和环境也进入最终结果。

Translation pending review.

仪器已给镜面倾角时不要再除以二;光束偏转的双倍关系属于不同变量。

Workflow & steps

01

Define the geometry

Define measurement axes, reference plane, path length and usable mirror aperture. Choose direct angular measurement or base scanning. For straightness, record base length and step spacing and check that reflector and support contacts are clean and stable.

02

Align and zero

Bring the return image into the usable field and set focus, exposure and mirror orientation, avoiding stray reflections and saturation. Clarify whether zero represents a reference direction or a software offset. Save the pre-zero reading and sign convention.

03

Acquire and reverse

Read both angular axes with consistent settling conditions and unchanged path and base conditions. Use forward and reverse scans to check hysteresis and drift. For long paths, pay particular attention to air disturbance, vibration and ambient temperature changes.

04

Calculate with the correct angle

For small angles, focal-plane displacement x≈2fθ with θ in radians. Do not divide by two again if the instrument already reports mirror tilt. In a base method, each height increment is Δh=b·tanθ; integrate along the path and define the reference line.

05

Evaluate and report

Report base length, positions, raw dual-axis data, forward–reverse differences and the reference-line algorithm. Include angle calibration, base-length error, reflector quality and environmental repeatability in uncertainty analysis. Distinguish resolution, repeatability and indication error.

Checks

  • • Confirm whether the display reports mirror angle or beam deflection.
  • • Archive step spacing, base length and the reference-line definition.
  • • Measure environmental effects on long paths; do not infer them from resolution.

Illustrative example

Teaching example: a 100 mm base with 1 arcsecond of mirror tilt gives a height increment of about 0.485 μm. This is an ideal geometric conversion; a straightness result still requires multiple points, a reference-line treatment and an error assessment.

Related instruments & resources

Links support navigation and do not establish a model’s performance or standards compliance.

Your next research question. Let’s explore.

Tell us about your material, specimen and measurement goal.

Discuss your application ↗
Find your instrument
⌕
Search products, cases, solutions, standards and literature.