SHANGHAI MICROCRE OPTICS-MECH TECH CO., LTDAbout MICROCRE400-812-7833
INDUSTRIES

Deformation under high pressure and temperature: industry application

Test plan for "Deformation under high pressure and temperature". Specimens of fused silica are measured under very-high-cycle fatigue at 20 kHz following extreme-environment testing. The plan fixes sampling, measurement parameters, acceptance basis and record format, and reports crack length and growth rate with explicit limits of interpretation.

Reporting requirements

Method name and standard edition

Sampling location, specimen condition and count

Environment, equipment and calibration status

Result, dispersion, uncertainty and decision

Common misconceptions

Reusing historical data from a similar material while ignoring batch and process differences

Reporting only a mean value without dispersion, repeatability or uncertainty

Workflow & steps

01

Define the environment envelope and coupled fields

Turn the task into verifiable measurands: state which standard or technical agreement defines %s, and fix the record fields.

02

Check thermal match of system and specimen

Prepare specimens or measurement points for the material and purpose: confirm the temperature limits of furnace, grips, sensors and specimen, evacuate or purge and stabilise before loading, and control heating and cooling rates.

03

Establish vacuum or atmosphere

Verify calibration status, fixtures and sensor ranges against the environmental envelope; complete the uncertainty budget before measuring.

04

Ramp and stabilise temperature

Execute the fixed method with identical parameters; stabilise the environment within the specified time and log any abnormal condition separately.

05

Load and acquire multi-field signals

Judge the main value, outliers and repeatability; keep raw records for any rejected point and state the basis instead of deleting it.

06

Assess environment-induced bias

Report method, conditions, results, uncertainty and applicability limits; do not extrapolate beyond the tested environment.

Checks

  • • The acceptance basis traces to a standard clause or technical agreement
  • • Environmental conditions and stabilisation time are logged continuously
  • • Raw data, processing and the decision are reproducible

Illustrative example

Teaching example: use fused silica measured under very-high-cycle fatigue at 20 kHz to show the record format and decision flow; values are assumed, not customer measurements.

Related instruments & resources

Links support navigation and do not establish a model’s performance or standards compliance.

Your next research question. Let’s explore.

Tell us about your material, specimen and measurement goal.

Discuss your application ↗
Find your instrument
⌕
Search products, cases, solutions, standards and literature.