@article{lit-adams-boundary-1993, title = {Orientation imaging microscopy: application to the measurement of grain boundary structure}, author = {Brent L. Adams}, year = {1993}, doi = {10.1016/0921-5093(93)90310-B}, url = {https://www.sciencedirect.com/science/article/pii/092150939390310B}, journal = {Materials Science and Engineering: A}, } @article{lit-adams-oim-1993, title = {Orientation imaging: The emergence of a new microscopy}, author = {Brent L. Adams and Stuart I. Wright and Karsten Kunze}, year = {1993}, doi = {10.1007/BF02656503}, url = {https://link.springer.com/article/10.1007/BF02656503}, journal = {Metallurgical Transactions A}, } @article{lit-anstis-fracture-1981, title = {A Critical Evaluation of Indentation Techniques for Measuring Fracture Toughness: I, Direct Crack Measurements}, author = {G. R. Anstis and P. Chantikul and B. R. Lawn and D. B. Marshall}, year = {1981}, doi = {10.1111/j.1151-2916.1981.tb10320.x}, url = {https://ceramics.onlinelibrary.wiley.com/doi/10.1111/j.1151-2916.1981.tb10320.x}, journal = {Journal of the American Ceramic Society}, } @article{lit-aspinall-li-mg-electrode-2024, title = {The impact of magnesium content on lithium-magnesium alloy electrode performance with argyrodite solid electrolyte}, author = {Jack Aspinall and Krishnakanth Sada and Hua Guo and Souhardh Kotakadi and Sudarshan Narayanan and Yvonne Chart and Ben Jagger and Emily Milan and Laurence Brassart and David Armstrong and Mauro Pasta}, year = {2024}, doi = {10.1038/s41467-024-48071-0}, url = {https://www.nature.com/articles/s41467-024-48071-0}, journal = {Nature Communications 15, 4511}, } @article{lit-berke-2014-uv-dic, title = {Ultraviolet digital image correlation (UV-DIC) for high temperature applications}, author = {Ryan B. Berke and John Lambros}, year = {2014}, doi = {10.1063/1.4871991}, url = {https://pubmed.ncbi.nlm.nih.gov/24784673/}, journal = {Review of Scientific Instruments}, } @article{lit-bolshakov-pileup-1998, title = {Influences of pileup on the measurement of mechanical properties by load and depth sensing indentation techniques}, author = {A. Bolshakov and G. M. Pharr}, year = {1998}, doi = {10.1557/JMR.1998.0146}, url = {https://www.cambridge.org/core/journals/journal-of-materials-research/article/abs/influences-of-pileup-on-the-measurement-of-mechanical-properties-by-load-and-depth-sensing-indentation-techniques/CB4A16D9AFCAE75CAEA01E38B435E1B5}, journal = {Journal of Materials Research}, } @techreport{lit-brown-donmez-am-microstructure-2016, title = {Microstructure Analysis for Additive Manufacturing: A Review of Existing Standards}, author = {Christopher U. Brown and Alkan Donmez}, year = {2016}, doi = {10.6028/NIST.AMS.100-3}, url = {https://www.nist.gov/publications/microstructure-analysis-additive-manufacturing-review-existing-standards}, } @techreport{lit-burdette-gc-srm2261a-2026, title = {Certification of Standard Reference Material® 2261a: Chlorinated Pesticides in Hexane (Nominal Mass Concentration 2 µg/mL)}, author = {Carolyn Burdette and Amy Cuthbertson and James Yen}, year = {2026}, doi = {10.6028/NIST.SP.260-273}, url = {https://www.nist.gov/publications/certification-standard-reference-materialr-2261achlorinated-pesticides-hexane-nominal}, } @article{lit-campbell-limit-2017, title = {Limit case analysis of the “stable indenter velocity” method for obtaining creep stress exponents from constant load indentation creep tests}, author = {J. Campbell and J. Dean and T. W. Clyne}, year = {2017}, doi = {10.1007/s11043-016-9316-x}, url = {https://link.springer.com/article/10.1007/s11043-016-9316-x}, journal = {Mechanics of Time-Dependent Materials}, } @article{lit-cheng-scaling-1998, title = {Scaling approach to conical indentation in elastic-plastic solids with work hardening}, author = {Yang Tse Cheng and Che Min Cheng}, year = {1998}, doi = {10.1063/1.368196}, url = {https://scholars.uky.edu/en/publications/scaling-approach-to-conical-indentation-in-elastic-plastic-solids/}, journal = {Journal of Applied Physics}, } @article{lit-chudoba-creep-2001, title = {Investigation of creep behaviour under load during indentation experiments and its influence on hardness and modulus results}, author = {Thomas Chudoba and Frank Richter}, year = {2001}, doi = {10.1016/S0257-8972(01)01340-8}, url = {https://www.sciencedirect.com/science/article/pii/S0257897201013408}, journal = {Surface and Coatings Technology}, } @article{lit-conte-vacuum-2019, title = {Novel high temperature vacuum nanoindentation system with active surface referencing and non-contact heating for measurements up to 800 °C}, author = {Marcello Conte and Gaurav Mohanty and Jakob J. Schwiedrzik and Jeffrey M. Wheeler and Bertrand Bellaton and Johann Michler and Nicholas X. Randall}, year = {2019}, doi = {10.1063/1.5029873}, url = {https://pubmed.ncbi.nlm.nih.gov/31042979/}, journal = {Review of Scientific Instruments}, } @article{lit-cordill-cellulose-acetate-2025, title = {Using nanoindentation to study the aging of cellulose acetate in cinematographic films}, author = {Megan J. Cordill and Stanislav Zak and Nadja Wallaszkovits}, year = {2025}, doi = {10.1038/s40494-025-01940-3}, url = {https://www.nature.com/articles/s40494-025-01940-3}, journal = {npj Heritage Science 13, 364}, } @article{lit-dao-inverse-2001, title = {Computational modeling of the forward and reverse problems in instrumented sharp indentation}, author = {M. Dao and N. Chollacoop and K. J. Van Vliet and T. A. Venkatesh and S. Suresh}, year = {2001}, doi = {10.1016/S1359-6454(01)00295-6}, url = {https://www.sciencedirect.com/science/article/pii/S1359645401002956}, journal = {Acta Materialia}, } @article{lit-dean-creep-2013, title = {A procedure for extracting primary and secondary creep parameters from nanoindentation data}, author = {J. Dean and A. Bradbury and G. Aldrich-Smith and T. W. Clyne}, year = {2013}, doi = {10.1016/j.mechmat.2013.05.014}, url = {https://www.sciencedirect.com/science/article/abs/pii/S0167663613001002}, journal = {Mechanics of Materials}, } @article{lit-dimiduk-nickel-2005, title = {Size-affected single-slip behavior of pure nickel microcrystals}, author = {D. M. Dimiduk and M. D. Uchic and T. A. Parthasarathy}, year = {2005}, doi = {10.1016/j.actamat.2005.05.023}, url = {https://www.sciencedirect.com/science/article/pii/S1359645405002880}, journal = {Acta Materialia}, } @article{lit-doerner-nix-1986, title = {A method for interpreting the data from depth-sensing indentation instruments}, author = {M. F. Doerner and W. D. Nix}, year = {1986}, doi = {10.1557/JMR.1986.0601}, url = {https://www.cambridge.org/core/journals/journal-of-materials-research/article/method-for-interpreting-the-data-from-depthsensing-indentation-instruments/F15B242DEAD2C9CE6B42E9CCA31D522C}, journal = {Journal of Materials Research}, } @article{lit-duszova-hec-2023, title = {Nanohardness and indentation fracture resistance of dual-phase high-entropy ceramic}, author = {Annamária Naughton Duszová and Lenka Ďaková and Tamás Csanádi and Alexandra Kovalčíková and Vasanthakumar Kombamuthu and Hakan Ünsal and Peter Tatarko and Monika Tatarková and Pavol Hvizdoš and Pavol Šajgalík}, year = {2023}, doi = {10.1016/j.ceramint.2022.12.027}, url = {https://www.sciencedirect.com/science/article/pii/S0272884222044224}, journal = {Ceramics International}, } @article{lit-evans-charles-1976, title = {Fracture Toughness Determinations by Indentation}, author = {A. G. Evans and E. A. Charles}, year = {1976}, doi = {10.1111/j.1151-2916.1976.tb10991.x}, url = {https://ceramics.onlinelibrary.wiley.com/doi/10.1111/j.1151-2916.1976.tb10991.x}, journal = {Journal of the American Ceramic Society}, } @article{lit-everitt-isothermal-2011, title = {High temperature nanoindentation – the importance of isothermal contact}, author = {N. M. Everitt and M. I. Davies and J. F. Smith}, year = {2011}, doi = {10.1080/14786435.2010.496745}, url = {https://www.tandfonline.com/doi/abs/10.1080/14786435.2010.496745}, journal = {Philosophical Magazine}, } @techreport{lit-fortin-adamantane-dsc-2024, title = {Development of Reference Material 8103: Adamantane for Subambient DSC Temperature and Enthalpy Calibration}, author = {Tara Fortin and Amanda Koepke and Jolene Splett}, year = {2024}, doi = {10.6028/NIST.SP.260-241}, url = {https://www.nist.gov/publications/development-reference-material-8103-adamantane-subambient-dsc-temperature-and-enthalpy}, } @techreport{lit-fortin-indium-dsc-2024, title = {Certification of Standard Reference Material® 2232a: Indium for DSC Temperature and Enthalpy Calibration}, author = {Tara Fortin and Tobias Herman and Amanda Koepke and Jolene Splett}, year = {2024}, doi = {10.6028/NIST.SP.260-242}, url = {https://www.nist.gov/publications/certification-standard-reference-materialr-2232a-indium-dsc-temperature-and-enthalpy}, } @inproceedings{lit-fox-am-confocal-xct-2017, title = {Investigation of complementary use of optical metrology and x-ray computed tomography for surface finish in laser powder bed fusion additive manufacturing}, author = {Jason Fox and Felix Kim and Zachary Reese and Christopher Evans}, year = {2017}, url = {https://www.nist.gov/publications/investigation-complementary-use-optical-metrology-and-x-ray-computed-tomography-surface}, booktitle = {Dimensional Accuracy and Surface Finish in Additive Manufacturing, euspen SIG}, } @article{lit-franke-trenkle-schuh-2010, title = {Temperature dependence of the indentation size effect}, author = {Oliver Franke and Jonathan C. Trenkle and Christopher A. Schuh}, year = {2010}, doi = {10.1557/JMR.2010.0159}, url = {https://www.cambridge.org/core/journals/journal-of-materials-research/article/temperature-dependence-of-the-indentation-size-effect/B64DD01C465F76545FA7EB88256C6AD5}, journal = {Journal of Materials Research}, } @article{lit-fu-sem-calibration-1994, title = {The Measurement and Uncertainty of a Calibration Standard for the Scanning Electron Microscope}, author = {Joseph Fu and M. C. Croarkin and Theodore V. Vorburger}, year = {1994}, doi = {10.6028/jres.099.015}, url = {https://www.nist.gov/publications/measurement-and-uncertainty-calibration-standard-sem}, journal = {Journal of Research of the National Institute of Standards and Technology 99, 191–200}, } @inproceedings{lit-geckeler-2008-distance, title = {Distance-dependent influences on angle metrology with autocollimators in deflectometry}, author = {Ralf D. Geckeler and Andreas Just}, year = {2008}, doi = {10.1117/12.793742}, url = {https://publica.ptb.de/resources/show/22308}, booktitle = {Proceedings of SPIE 7077}, publisher = {SPIE}, } @article{lit-geckeler-2019-environment, title = {Environmental influences on autocollimator-based angle and form metrology}, author = {Ralf D. Geckeler and Petr Kren and Andreas Just and Matthias Schumann and Michael Krause and Ian Lacey and Valeriy V. Yashchuk}, year = {2019}, doi = {10.1063/1.5057402}, url = {https://publica.ptb.de/resources/show/41906}, journal = {Review of Scientific Instruments}, } @article{lit-geckeler-2024-self-calibration, title = {Self-calibration strategies for reducing systematic slope measurement errors of autocollimators in deflectometric profilometry}, author = {Ralf D. Geckeler and Andreas Just and Michael Krause and Olaf Schnabel and Ian Lacey and Damon English and Valeriy V. Yashchuk}, year = {2024}, doi = {10.1107/S1600577524003552}, url = {https://pmc.ncbi.nlm.nih.gov/articles/PMC11226160/}, journal = {Journal of Synchrotron Radiation}, } @article{lit-geckeler-spatial-autocollimator-2012, title = {A novel approach for extending autocollimator calibration from plane to spatial angles}, author = {Ralf D. Geckeler and Oliver Kranz and Andreas Just and Michael Krause}, year = {2012}, doi = {10.1515/aot-2012-0048}, url = {https://publica.ptb.de/resources/show/28660}, journal = {Advanced Optical Technologies 1(6), 427–439}, } @article{lit-goodall-creep-2006, title = {A critical appraisal of the extraction of creep parameters from nanoindentation data obtained at room temperature}, author = {R. Goodall and T. W. Clyne}, year = {2006}, doi = {10.1016/j.actamat.2006.07.020}, url = {https://www.sciencedirect.com/science/article/abs/pii/S1359645406005271}, journal = {Acta Materialia}, } @article{lit-greer-gold-2005, title = {Size dependence of mechanical properties of gold at the micron scale in the absence of strain gradients}, author = {Julia R. Greer and Warren C. Oliver and William D. Nix}, year = {2005}, doi = {10.1016/j.actamat.2004.12.031}, url = {https://authors.library.caltech.edu/records/mxshx-cn478}, journal = {Acta Materialia}, } @techreport{lit-hanssen-infrared-properties-2015, title = {Infrared Optical Properties of Materials}, author = {Leonard Hanssen and Simon Kaplan and Raju Datla}, year = {2015}, doi = {10.6028/NIST.SP.250-94}, url = {https://www.nist.gov/publications/infrared-optical-properties-materials}, } @article{lit-he-textured-max-oxidation-2023, title = {Anisotropy oxidation behavior and mechanism of textured Ti3(SiAl)C2 ceramic}, author = {Guangqi He and Xintao Zhang and Wenting Wang and Ke Ma and Jun Zuo and Meishuan Li and Changsheng Liu and Jingjun Xu}, year = {2023}, doi = {10.1038/s41529-023-00339-4}, url = {https://www.nature.com/articles/s41529-023-00339-4}, journal = {npj Materials Degradation 7, 19}, } @article{lit-hou-isothermal-2017, title = {Establishing isothermal contact at a known temperature under thermal equilibrium in elevated temperature instrumented indentation testing}, author = {Xiaodong Hou and C. L. M. Alvarez and Nigel M. Jennett}, year = {2017}, doi = {10.1088/1361-6501/aa533d}, url = {https://pureportal.coventry.ac.uk/en/publications/establishing-isothermal-contact-at-a-known-temperature-under-ther-2/}, journal = {Measurement Science and Technology}, } @article{lit-hudson-angle-encoder-2015, title = {A simple method for high-precision calibration of an angle encoder using an electronic nulling autocollimator}, author = {Lawrence T. Hudson and M. N. Kinnane and Albert Henins and M. H. Mendenhall}, year = {2015}, doi = {10.1088/0026-1394/52/2/244}, url = {https://www.nist.gov/publications/simple-method-high-precision-calibration-angle-encoder-using-electronic-nulling}, journal = {Metrologia 52, 244}, } @techreport{lit-jcgm-100-2008, title = {Evaluation of measurement data — Guide to the expression of uncertainty in measurement}, author = {{Joint Committee for Guides in Metrology}}, year = {2008}, doi = {10.59161/JCGM100-2008E}, url = {https://doi.org/10.59161/JCGM100-2008E}, institution = {Joint Committee for Guides in Metrology}, number = {JCGM 100:2008}, } @techreport{lit-jcgm-100-amd1-2026, title = {Evaluation of measurement data — Guide to the expression of uncertainty in measurement. Amendment 1: Nonlinearity in measurement models}, author = {{Joint Committee for Guides in Metrology}}, year = {2026}, doi = {10.59161/PPDI3267}, url = {https://doi.org/10.59161/PPDI3267}, institution = {Joint Committee for Guides in Metrology}, number = {JCGM 100:2008/Amd.1:2026}, } @techreport{lit-jcgm-101-2008, title = {Evaluation of measurement data — Supplement 1 to the GUM — Propagation of distributions using a Monte Carlo method}, author = {{Joint Committee for Guides in Metrology}}, year = {2008}, doi = {10.59161/JCGM101-2008}, url = {https://doi.org/10.59161/JCGM101-2008}, institution = {Joint Committee for Guides in Metrology}, number = {JCGM 101:2008}, } @techreport{lit-jcgm-gum6-2020, title = {Guide to the expression of uncertainty in measurement — Part 6: Developing and using measurement models}, author = {{Joint Committee for Guides in Metrology}}, year = {2020}, doi = {10.59161/JCGMGUM-6-2020}, url = {https://doi.org/10.59161/JCGMGUM-6-2020}, institution = {Joint Committee for Guides in Metrology}, number = {JCGM GUM-6:2020}, } @article{lit-keller-tkd-2012, title = {Transmission EBSD from 10 nm domains in a scanning electron microscope}, author = {Robert R. Keller and Roy H. Geiss}, year = {2012}, doi = {10.1111/j.1365-2818.2011.03566.x}, url = {https://www.nist.gov/publications/transmission-ebsd-10-nm-domains-scanning-electron-microscope}, journal = {Journal of Microscopy}, } @article{lit-lawn-radial-1980, title = {Elastic/Plastic Indentation Damage in Ceramics: The Median/Radial Crack System}, author = {B. R. Lawn and A. G. Evans and D. B. Marshall}, year = {1980}, doi = {10.1111/j.1151-2916.1980.tb10768.x}, url = {https://ceramics.onlinelibrary.wiley.com/doi/10.1111/j.1151-2916.1980.tb10768.x}, journal = {Journal of the American Ceramic Society}, } @article{lit-lucas-indium-1999, title = {Indentation power-law creep of high-purity indium}, author = {B. N. Lucas and W. C. Oliver}, year = {1999}, doi = {10.1007/s11661-999-0051-7}, url = {https://link.springer.com/article/10.1007/s11661-999-0051-7}, journal = {Metallurgical and Materials Transactions A}, } @article{lit-maier-creep-2013, title = {An improved long-term nanoindentation creep testing approach for studying the local deformation processes in nanocrystalline metals at room and elevated temperatures}, author = {Verena Maier and Benoit Merle and Mathias Göken and Karsten Durst}, year = {2013}, doi = {10.1557/jmr.2013.39}, url = {https://www.cambridge.org/core/journals/journal-of-materials-research/article/abs/an-improved-longterm-nanoindentation-creep-testing-approach-for-studying-the-local-deformation-processes-in-nanocrystalline-metals-at-room-and-elevated-temperatures/8103C8F8EC6C3D676232BAAD19563EA6}, journal = {Journal of Materials Research}, } @article{lit-mansfield-tga-swcnt-2010, title = {Applications of TGA in quality control of SWCNTs}, author = {Elisabeth Mansfield and Aparna Kar and Stephanie A. Hooker}, year = {2010}, doi = {10.1007/s00216-009-3319-2}, url = {https://link.springer.com/article/10.1007/s00216-009-3319-2}, journal = {Analytical and Bioanalytical Chemistry 396, 1071–1077}, } @article{lit-mason-lund-schuh-2006, title = {Determining the activation energy and volume for the onset of plasticity during nanoindentation}, author = {J. K. Mason and A. C. Lund and C. A. Schuh}, year = {2006}, doi = {10.1103/PhysRevB.73.054102}, url = {https://journals.aps.org/prb/abstract/10.1103/PhysRevB.73.054102}, journal = {Physical Review B}, } @article{lit-minnert-uht-2020, title = {New ultra-high temperature nanoindentation system for operating at up to 1100 °C}, author = {Christian Minnert and Warren C. Oliver and Karsten Durst}, year = {2020}, doi = {10.1016/j.matdes.2020.108727}, url = {https://www.sciencedirect.com/science/article/pii/S0264127520302616}, journal = {Materials & Design}, } @techreport{lit-nist-tn1297-1994, title = {Guidelines for Evaluating and Expressing the Uncertainty of NIST Measurement Results}, author = {Barry N. Taylor and Chris E. Kuyatt}, year = {1994}, url = {https://www.nist.gov/pml/nist-technical-note-1297}, institution = {National Institute of Standards and Technology}, number = {NIST Technical Note 1297}, } @article{lit-nix-gao-1998, title = {Indentation size effects in crystalline materials: A law for strain gradient plasticity}, author = {William D. Nix and Huajian Gao}, year = {1998}, doi = {10.1016/S0022-5096(97)00086-0}, url = {https://www.sciencedirect.com/science/article/pii/S0022509697000860}, journal = {Journal of the Mechanics and Physics of Solids}, } @article{lit-oliver-pharr-1992, title = {An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments}, author = {W. C. Oliver and G. M. Pharr}, year = {1992}, doi = {10.1557/JMR.1992.1564}, url = {https://www.cambridge.org/core/journals/journal-of-materials-research/article/abs/an-improved-technique-for-determing-hardness-and-elastic-modulus-using-load-and-displacement-sensing-indentation-experiments/A53D45298E14F73B86495BBC056E16DC}, journal = {Journal of Materials Research}, } @article{lit-pan-2009-dic-review, title = {Two-dimensional digital image correlation for in-plane displacement and strain measurement: a review}, author = {Bing Pan and Kemao Qian and Huimin Xie and Anand Asundi}, year = {2009}, doi = {10.1088/0957-0233/20/6/062001}, url = {https://doi.org/10.1088/0957-0233/20/6/062001}, journal = {Measurement Science and Technology}, } @article{lit-pharr-stiffness-1992, title = {On the generality of the relationship among contact stiffness, contact area, and elastic modulus during indentation}, author = {G. M. Pharr and W. C. Oliver and F. R. Brotzen}, year = {1992}, doi = {10.1557/JMR.1992.0613}, url = {https://www.cambridge.org/core/journals/journal-of-materials-research/article/abs/on-the-generality-of-the-relationship-among-contact-stiffness-contact-area-and-elastic-modulus-during-indentation/001EA7ED417E4CAD2B3C8265EC47588B}, journal = {Journal of Materials Research}, } @inproceedings{lit-phillips-cmm-traceability-2000, title = {Traceability Calibration, & Measurement Uncertainty Issues Regarding Coordinate Measuring Machines and Other Complex Instruments}, author = {Steven D. Phillips}, year = {2000}, url = {https://www.nist.gov/publications/traceability-calibration-measurement-uncertainty-issues-regarding-coordinate-measuring}, booktitle = {Proceedings of Association for Coordinate Metrology Canada (ACMC)}, } @article{lit-rhee-psi-wli-roughness-2005, title = {Discrepancies between roughness measurements obtained with phase-shifting and white-light interferometry}, author = {Hyug-Gyo Rhee and Theodore V. Vorburger and Jonathan W. Lee and Joseph Fu}, year = {2005}, doi = {10.1364/AO.44.005919}, url = {https://opg.optica.org/ao/abstract.cfm?uri=ao-44-28-5919}, journal = {Applied Optics 44(28), 5919–5927}, } @article{lit-rutkowski-b4c-2024, title = {Nanoindentation of B4C-HfB2 particulate ceramic composite doped with Cr–B compounds}, author = {P. Rutkowski and P. Nieroda and P. Pichniarczyk and M. Lugovy and N. Orlovskaya and G. Cios and D. Kata}, year = {2024}, doi = {10.1016/j.ceramint.2024.07.371}, url = {https://www.sciencedirect.com/science/article/pii/S0272884224033157}, journal = {Ceramics International}, } @techreport{lit-sander-liquid-chromatography-2017, title = {Liquid Chromatography: Introduction to Method Development}, author = {Lane C. Sander}, year = {2017}, doi = {10.6028/jres.122.018}, url = {https://www.nist.gov/publications/liquid-chromatography-introduction-method-development}, } @article{lit-schindelin-2012-fiji, title = {Fiji: an open-source platform for biological-image analysis}, author = {Johannes Schindelin and Ignacio Arganda-Carreras and Erwin Frise and Verena Kaynig and Mark Longair and Tobias Pietzsch and Stephan Preibisch and Curtis Rueden and Stephan Saalfeld and Benjamin Schmid and Jean-Yves Tinevez and Daniel James White and Volker Hartenstein and Kevin Eliceiri and Pavel Tomancak and Albert Cardona}, year = {2012}, doi = {10.1038/nmeth.2019}, url = {https://www.nature.com/articles/nmeth.2019}, journal = {Nature Methods}, } @article{lit-schneider-2012-imagej, title = {NIH Image to ImageJ: 25 years of image analysis}, author = {Caroline A. Schneider and Wayne S. Rasband and Kevin W. Eliceiri}, year = {2012}, doi = {10.1038/nmeth.2089}, url = {https://doi.org/10.1038/nmeth.2089}, journal = {Nature Methods}, } @article{lit-schuh-nucleation-2005, title = {Quantitative insight into dislocation nucleation from high-temperature nanoindentation experiments}, author = {C. A. Schuh and J. K. Mason and A. C. Lund}, year = {2005}, doi = {10.1038/nmat1429}, url = {https://www.nature.com/articles/nmat1429}, journal = {Nature Materials}, } @article{lit-schuh-packard-lund-2006, title = {Nanoindentation and contact-mode imaging at high temperatures}, author = {Christopher A. Schuh and Corinne E. Packard and Alan C. Lund}, year = {2006}, doi = {10.1557/jmr.2006.0080}, url = {https://www.cambridge.org/core/journals/journal-of-materials-research/article/abs/nanoindentation-and-contactmode-imaging-at-high-temperatures/44D492048C2A20958998E668A4A46489}, journal = {Journal of Materials Research}, } @techreport{lit-scott-giannuzzi-polymer-tem-2015, title = {Strategies for Transmission Electron Microscopy Specimen Preparation of Polymer Composites}, author = {Keana Scott and Lucille A. Giannuzzi}, year = {2015}, doi = {10.6028/NIST.SP.1200-16}, url = {https://www.nist.gov/publications/strategies-transmission-electron-microscopy-specimen-preparation-polymer-composites}, } @article{lit-sharma-soft-lens-afm-2022, title = {Surface characterization of an ultra-soft contact lens material using an atomic force microscopy nanoindentation method}, author = {Vinay Sharma and Xinfeng Shi and George Yao and George M. Pharr and James Yuliang Wu}, year = {2022}, doi = {10.1038/s41598-022-24701-9}, url = {https://www.nature.com/articles/s41598-022-24701-9}, journal = {Scientific Reports 12, 20013}, } @inproceedings{lit-sharp-glass-elemental-2025, title = {Comparison of Bulk and Micro Sampling Techniques for the Elemental Analysis of SRM 610 and 612}, author = {Nicholas Sharp and Maria Isabel Vega Martinez and Ruthmara Corzo and Blaza Toman and Rick Paul and Savelas Rabb and Jack Prothero and Jamie Weaver}, year = {2025}, doi = {10.1093/mam/ozaf048.255}, url = {https://www.nist.gov/publications/comparison-bulk-and-micro-sampling-techniques-elemental-analysis-srm-610-and-612}, booktitle = {Microscopy & Microanalysis Proceedings 2025}, } @article{lit-shen-tinzrn-2023, title = {Deformation mechanism and mechanical properties of TiN/ZrN nanolaminates by nanoindentation: effect of layer thickness and temperature}, author = {Sijia Shen and Hongbo Li and Chuanyun Wang and Jinting Wu and Tingxing Zhao and Lingwei Yang}, year = {2023}, doi = {10.1016/j.surfcoat.2023.129230}, url = {https://www.sciencedirect.com/science/article/abs/pii/S0257897223000051}, journal = {Surface and Coatings Technology}, } @article{lit-siceo2-2026, title = {High-Temperature Mechanical Characterization of CeO2 as a Ceramic Surrogate Fuel Based on FIB and Nanoindentation}, author = {Jiaxuan Si and Jiajun Xu and Shiqiang He and Dongsheng Xie and Changfeng Dong and Pengcheng Zhu and Risheng Qiu}, year = {2026}, doi = {10.3390/ma19102134}, url = {https://www.mdpi.com/1996-1944/19/10/2134}, journal = {Materials}, } @article{lit-sos-mgo-2026, title = {Thermally Activated Deformation Mechanisms in MgO Investigated via High Temperature Scanning Indentation}, author = {Marcel Sos and Oliver Preuß and Sebastian Bruns and Karsten Durst}, year = {2026}, doi = {10.1111/jace.70977}, url = {https://ceramics.onlinelibrary.wiley.com/doi/10.1111/jace.70977?af=R}, journal = {Journal of the American Ceramic Society}, } @article{lit-stan-afm-z-calibration-2026, title = {AFM z-piezo calibration method for height measurements in the sub-nanometer to nanometer range using stepped surfaces}, author = {Gheorghe Stan}, year = {2026}, url = {https://www.nist.gov/publications/calibration-method-height-and-linearity-afm-z-piezo-transducer-sub-nanometer-nanometer}, journal = {Measurement Science and Technology}, } @article{lit-stone-small-angle-2004, title = {Uncertainties in Small-Angle Measurement Systems Used to Calibrate Angle Artifacts}, author = {Jack A. Stone and Mohamed Amer and Bryon Faust and Jay Zimmerman}, year = {2004}, doi = {10.6028/jres.109.024}, url = {https://www.nist.gov/publications/uncertainties-small-angle-measurement-systems-used-calibrate-angle-artifacts}, journal = {Journal of Research of the National Institute of Standards and Technology 109, 319–333}, } @article{lit-sutton-dic-1983, title = {Determination of displacements using an improved digital correlation method}, author = {M. A. Sutton and W. J. Wolters and W. H. Peters and W. F. Ranson and S. R. McNeill}, year = {1983}, doi = {10.1016/0262-8856(83)90064-1}, url = {https://www.sciencedirect.com/science/article/pii/0262885683900641}, journal = {Image and Vision Computing}, } @article{lit-trenkle-inert-2010, title = {Hot nanoindentation in inert environments}, author = {Jonathan C. Trenkle and Corinne E. Packard and Christopher A. Schuh}, year = {2010}, doi = {10.1063/1.3436633}, url = {https://dspace.mit.edu/entities/publication/ce114679-79eb-4f8c-9a29-465dc007afce}, journal = {Review of Scientific Instruments}, } @article{lit-uchic-size-2004, title = {Sample dimensions influence strength and crystal plasticity}, author = {Michael D. Uchic and Dennis M. Dimiduk and Jeffrey N. Florando and William D. Nix}, year = {2004}, doi = {10.1126/science.1098993}, url = {https://pubmed.ncbi.nlm.nih.gov/15310897/}, journal = {Science}, } @techreport{lit-urbas-raman-srm2246a-2024, title = {Certification of Standard Reference Material® 2246a Relative Intensity Correction Standard for Raman Spectroscopy: 830 nm Excitation}, author = {Aaron Urbas and Krissie Gierz and Dennis D. Leber}, year = {2024}, doi = {10.6028/NIST.SP.260-244}, url = {https://www.nist.gov/publications/certification-standard-reference-materialr-2246a-relative-intensity-correction-standard}, } @techreport{lit-vorburger-roughness-calibration-2014, title = {NIST Surface Roughness and Step Height Calibrations: Measurement Conditions and Sources of Uncertainty}, author = {Theodore V. Vorburger and Thomas Brian Renegar and Xiaoyu Alan Zheng and Jun-Feng Song and Johannes A. Soons and Richard M. Silver}, year = {2014}, url = {https://www.nist.gov/publications/nist-surface-roughness-and-step-height-calibrations-measurement-conditions-and-sources}, } @article{lit-wang-2017-dic-2000, title = {Measurement of high temperature full-field strain up to 2000 °C using digital image correlation}, author = {Wei Wang and Chenghai Xu and Hua Jin and Songhe Meng and Yumin Zhang and Weihua Xie}, year = {2017}, doi = {10.1088/1361-6501/aa56d1}, url = {https://doi.org/10.1088/1361-6501/aa56d1}, journal = {Measurement Science and Technology}, } @article{lit-wang-altao4-2024, title = {Uncovering dominant mechanisms of nano-mechanical properties of AlTaO4 ceramics from structural characteristics}, author = {Jiankun Wang and Lin Chen and Baihui Li and Luyang Zhang and Guiyu Xue and Di Zhang and Bin Xu and Zhiyi Ren and Meng Wang and Shixiao Yan and Xiaoliang Sun and Chi Liu and Jing Feng}, year = {2024}, doi = {10.1016/j.ceramint.2024.06.140}, url = {https://www.sciencedirect.com/science/article/pii/S0272884224025549}, journal = {Ceramics International}, } @techreport{lit-weeks-x100-metallurgy-2024, title = {Mechanical Metallurgy on Columbia Gas X100 Experimental Pipe}, author = {Dash Weeks and Ryan White and Jake Benzing and Enrico Lucon and Nicholas Derimow and Ashley Kroon and Robert Smith}, year = {2024}, doi = {10.6028/NIST.IR.8535}, url = {https://www.nist.gov/publications/mechanical-metallurgy-columbia-gas-x100-experimental-pipe}, } @article{lit-wheeler-contact-2012, title = {Elevated temperature, in situ indentation with calibrated contact temperatures}, author = {J. M. Wheeler and P. Brodard and J. Michler}, year = {2012}, doi = {10.1080/14786435.2012.674647}, url = {https://www.tandfonline.com/doi/abs/10.1080/14786435.2012.674647}, journal = {Philosophical Magazine}, } @article{lit-wilkinson-hrebsd-2006, title = {High-resolution elastic strain measurement from electron backscatter diffraction patterns: new levels of sensitivity}, author = {Angus J. Wilkinson and Graham Meaden and David J. Dingley}, year = {2006}, doi = {10.1016/j.ultramic.2005.10.001}, url = {https://pubmed.ncbi.nlm.nih.gov/16324788/}, journal = {Ultramicroscopy}, } @article{lit-zhang-304l-preparation-2026, title = {A systematic study of sample preparation-induced martensitic phase formation in 304 L austenitic stainless steel}, author = {Xingshuo Zhang and Anish Ranjan and Matthew Luebbe and Fan Zhang and Haiming Wen}, year = {2026}, doi = {10.1016/j.mtla.2026.102877}, url = {https://www.sciencedirect.com/science/article/pii/S2589152926002279}, journal = {Materialia 50, 102877}, } @techreport{v9-guide-asm-creep, title = {ASM International Handbook Series — 高温蠕变与持久试验的数据解释}, author = {ASM International}, } @techreport{v9-guide-asme-gdandt, title = {ASME Standard Committee Guidance — 几何公差标注与测量的对应}, author = {ASME}, } @techreport{v9-guide-astm-dic, title = {ASTM Technical Committee Guidance — DIC 测量的报告要求}, author = {ASTM}, } @techreport{v9-guide-astm-fatigue, title = {ASTM Technical Committee Guidance — 疲劳试验的统计设计与数据报告}, author = {ASTM}, } @techreport{v9-guide-astm-hardness, title = {ASTM Technical Committee Guidance — 硬度试验方法选择的决策要点}, author = {ASTM}, } @techreport{v9-guide-astm-metallography, title = {ASTM Technical Committee Guidance — 金相制样质量对评级的影响}, author = {ASTM}, } @techreport{v9-guide-astm-ndt, title = {ASTM Technical Committee Guidance — 无损检测工艺规程的编制}, author = {ASTM}, } @techreport{v9-guide-astm-outgassing, title = {ASTM Technical Committee Guidance — 航天材料出气筛选}, author = {ASTM}, } @techreport{v9-guide-bipm-gum, title = {BIPM Guidance Series — GUM 在工业测量中的落地}, author = {BIPM}, } @techreport{v9-guide-ecss-fatigue, title = {ECSS Handbook — 航天结构疲劳与损伤容限验证}, author = {ECSS}, } @techreport{v9-guide-ecss-thermal, title = {ECSS Handbook — 空间环境模拟试验实施}, author = {ECSS}, } @techreport{v9-guide-euramet-angle, title = {EURAMET Calibration Guide — 角度计量器具的校准}, author = {EURAMET}, } @techreport{v9-guide-euramet-cmm, title = {EURAMET Calibration Guide — 坐标测量机的验收与复检}, author = {EURAMET}, } @techreport{v9-guide-euramet-hardness, title = {EURAMET Calibration Guide — 硬度计校准与不确定度评定}, author = {EURAMET}, } @techreport{v9-guide-euramet-ndt, title = {EURAMET Calibration Guide — 超声与涡流检测设备的校准}, author = {EURAMET}, } @techreport{v9-guide-euramet-spectro, title = {EURAMET Calibration Guide — 光谱仪校准与不确定度}, author = {EURAMET}, } @techreport{v9-guide-iec-safety, title = {IEC Technical Committee Guidance — 试验设备的安全联锁}, author = {IEC}, } @techreport{v9-guide-iso-ai, title = {ISO Technical Committee Guidance — AI 辅助检测的验收要素}, author = {ISO}, } @techreport{v9-guide-iso-automation, title = {ISO Technical Committee Guidance — 实验室自动化接口与数据完整性}, author = {ISO}, } @techreport{v9-guide-iso-chamber, title = {ISO Technical Committee Guidance — 环境试验箱的性能确认}, author = {ISO}, } @techreport{v9-guide-iso-cleanroom, title = {ISO Technical Committee Guidance — 洁净室监测与颗粒控制}, author = {ISO}, } @techreport{v9-guide-iso-creep, title = {ISO Technical Committee Guidance — 蠕变试验的温控与伸长测量}, author = {ISO}, } @techreport{v9-guide-iso-dsc, title = {ISO Technical Committee Guidance — 热分析曲线的可比性}, author = {ISO}, } @techreport{v9-guide-iso-fatigue, title = {ISO Technical Committee Guidance — 疲劳试验标准的适用条件}, author = {ISO}, } @techreport{v9-guide-iso-gps, title = {ISO Technical Committee Guidance — GPS 体系中判定规则的落地}, author = {ISO}, } @techreport{v9-guide-iso-hardness, title = {ISO Technical Committee Guidance — 硬度试验标准体系的结构与引用关系}, author = {ISO}, } @techreport{v9-guide-iso-lab, title = {ISO Technical Committee Guidance — 实验室能力验证与比对}, author = {ISO}, } @techreport{v9-guide-iso-metallography, title = {ISO Technical Committee Guidance — 显微组织定量分析的抽样}, author = {ISO}, } @techreport{v9-guide-iso-ndt, title = {ISO Technical Committee Guidance — 无损检测人员资格与能力}, author = {ISO}, } @techreport{v9-guide-iso-optics-drawing, title = {ISO Technical Committee Guidance — 光学图纸公差的解读}, author = {ISO}, } @techreport{v9-guide-iso-retrofit, title = {ISO Technical Committee Guidance — 在用设备改造的验收}, author = {ISO}, } @techreport{v9-guide-iso-vacuum, title = {ISO Technical Committee Guidance — 真空系统性能测量}, author = {ISO}, } @techreport{v9-guide-nasa-fracture, title = {NASA Technical Standard — 断裂控制与裂纹容限评定}, author = {NASA}, } @techreport{v9-guide-nasa-thermal, title = {NASA Technical Standard — 热真空试验的条件与判据}, author = {NASA}, } @techreport{v9-guide-nist-ai, title = {NIST Special Publication — AI 模型在测量中的可信性}, author = {NIST}, } @techreport{v9-guide-nist-data, title = {NIST Special Publication — 测量数据的完整性与可追溯}, author = {NIST}, } @techreport{v9-guide-nist-hardness, title = {NIST Special Publication — 硬度标准与比对的关键要素}, author = {NIST}, } @techreport{v9-guide-nist-optics, title = {NIST Special Publication — 光学角度与面形的溯源}, author = {NIST}, } @techreport{v9-guide-nist-spectro, title = {NIST Special Publication — 光谱化学分析的质控策略}, author = {NIST}, } @techreport{v9-guide-nist-surface, title = {NIST Special Publication — 表面形貌参数的标准化}, author = {NIST}, } @techreport{v9-guide-nist-tensile, title = {NIST Special Publication — 力学试验的量值溯源与比对}, author = {NIST}, } @techreport{v9-guide-nist-thermal, title = {NIST Special Publication — 热物性测量的溯源性}, author = {NIST}, } @techreport{v9-guide-npl-automation, title = {NPL Good Practice Guide — 自动化测量的期间核查}, author = {NPL}, } @techreport{v9-guide-npl-hardness, title = {NPL Good Practice Guide — 硬度量值溯源与标准块使用}, author = {NPL}, } @techreport{v9-guide-npl-indent, title = {NPL Good Practice Guide — 仪器化压痕测量的实践要点}, author = {NPL}, } @techreport{v9-guide-npl-optics, title = {NPL Good Practice Guide — 自准直仪与角度计量}, author = {NPL}, } @techreport{v9-guide-npl-speckle, title = {NPL Good Practice Guide — DIC 散斑制备与质量评价}, author = {NPL}, } @techreport{v9-guide-npl-straightness, title = {NPL Good Practice Guide — 直线度与运动精度的测量}, author = {NPL}, } @techreport{v9-guide-npl-surface, title = {NPL Good Practice Guide — 表面粗糙度测量的实践要点}, author = {NPL}, } @techreport{v9-guide-npl-tensile, title = {NPL Good Practice Guide — 拉伸试验的机架柔度与对中}, author = {NPL}, } @techreport{v9-guide-npl-uncertainty, title = {NPL Good Practice Guide — 不确定度预算的编制}, author = {NPL}, } @techreport{v9-guide-npl-vacuum, title = {NPL Good Practice Guide — 真空计校准与量值溯源}, author = {NPL}, } @techreport{v9-guide-ptb-hardness, title = {PTB Bericht — 显微硬度与纳米压痕的计量保障}, author = {PTB}, } @techreport{v9-guide-semiconductor, title = {SEMI Standards Series — 芯片与封装检测的项目组织}, author = {SEMI}, } @techreport{v9-guide-vdi-hardness, title = {VDI/VDE Guideline — 压痕法测材料参数的边界条件}, author = {VDI/VDE}, } @techreport{v9-guide-vdi-metallography, title = {VDI/VDE Guideline — 图像分析阈值的确定}, author = {VDI/VDE}, } @techreport{v9-guide-vdi-optics, title = {VDI/VDE Guideline — 光学测量系统的性能评定}, author = {VDI/VDE}, } @article{v9-lit-anstis-1981, title = {A critical evaluation of indentation techniques for measuring fracture toughness: I, direct crack measurements}, author = {G. R. Anstis and P. Chantikul and B. R. Lawn and D. B. Marshall}, year = {1981}, doi = {10.1111/j.1151-2916.1981.tb10320.x}, journal = {Journal of the American Ceramic Society}, } @article{v9-lit-archard-1953, title = {Contact and rubbing of flat surfaces}, author = {J. F. Archard}, year = {1953}, doi = {10.1063/1.1721448}, journal = {Journal of Applied Physics}, } @article{v9-lit-ashby-1972, title = {A first report on deformation-mechanism maps}, author = {M. F. Ashby}, year = {1972}, doi = {10.1016/0001-6160(72)90021-1}, journal = {Acta Metallurgica}, } @techreport{v9-lit-asm-handbook-9, title = {ASM Handbook, Volume 9: Metallography and Microstructures}, author = {ASM International}, year = {2004}, } @article{v9-lit-basquin-1910, title = {The exponential law of endurance tests}, author = {O. H. Basquin}, year = {1910}, journal = {Proceedings of the American Society for Testing and Materials}, } @techreport{v9-lit-born-wolf-1959, title = {Principles of Optics}, author = {M. Born and E. Wolf}, year = {1959}, } @techreport{v9-lit-bowden-tabor-1950, title = {The Friction and Lubrication of Solids}, author = {F. P. Bowden and D. Tabor}, year = {1950}, } @article{v9-lit-bruck-1989, title = {Digital image correlation using Newton-Raphson method of partial differential correction}, author = {H. A. Bruck and S. R. McNeill and M. A. Sutton and W. H. Peters}, year = {1989}, doi = {10.1007/BF02326376}, journal = {Experimental Mechanics}, } @techreport{v9-lit-buckle-1965, title = {Mikrohärteprüfung und ihre Anwendung}, author = {H. Bückle}, year = {1965}, } @article{v9-lit-butler-2018, title = {Machine learning for molecular and materials science}, author = {K. T. Butler and D. W. Davies and H. Cartwright and O. Isayev and A. Walsh}, year = {2018}, doi = {10.1038/s41586-018-0337-2}, journal = {Nature}, } @article{v9-lit-charpy-1901, title = {Note sur les essais de résilience}, author = {G. Charpy}, year = {1901}, journal = {Bulletin de la Société d’Encouragement pour l’Industrie Nationale}, } @techreport{v9-lit-chen-song-2011, title = {Split Hopkinson (Kolsky) Bar: Design, Testing and Applications}, author = {W. Chen and B. Song}, year = {2011}, } @article{v9-lit-chu-ranson-sutton-1985, title = {Applications of digital-image-correlation techniques to experimental mechanics}, author = {T. C. Chu and W. F. Ranson and M. A. Sutton}, year = {1985}, doi = {10.1007/BF02325092}, journal = {Experimental Mechanics}, } @article{v9-lit-coffin-1954, title = {A study of the effects of cyclic thermal stresses on a ductile metal}, author = {L. F. Coffin}, year = {1954}, journal = {Transactions of the ASME}, } @techreport{v9-lit-daniel-ishai-2006, title = {Engineering Mechanics of Composite Materials}, author = {I. M. Daniel and O. Ishai}, year = {2006}, } @article{v9-lit-debroy-2018, title = {Additive manufacturing of metallic components — process, structure and properties}, author = {T. DebRoy and H. L. Wei and J. S. Zuback and T. Mukherjee and J. W. Elmer and J. O. Milewski and A. M. Beese and A. Wilson-Heid and A. De and W. Zhang}, year = {2018}, doi = {10.1016/j.pmatsci.2017.12.001}, journal = {Progress in Materials Science}, } @article{v9-lit-doerner-nix-1986, title = {A method for interpreting the data from depth-sensing indentation instruments — Extended reading 29}, author = {M. F. Doerner and W. D. Nix}, year = {1986}, doi = {10.1557/JMR.1986.0601}, journal = {Journal of Materials Research}, } @techreport{v9-lit-ecss-10-03, title = {ECSS-E-ST-10-03C — Space engineering: Testing}, author = {European Cooperation for Space Standardization}, year = {2012}, } @techreport{v9-lit-fischer-cripps-2004, title = {Nanoindentation}, author = {A. C. Fischer-Cripps}, year = {2004}, } @techreport{v9-lit-fontana-1986, title = {Corrosion Engineering}, author = {M. G. Fontana}, year = {1986}, } @techreport{v9-lit-freund-suresh-2003, title = {Thin Film Materials: Stress, Defect Formation and Surface Evolution}, author = {L. B. Freund and S. Suresh}, year = {2003}, } @techreport{v9-lit-frost-ashby-1982, title = {Deformation-Mechanism Maps: The Plasticity and Creep of Metals and Ceramics}, author = {H. J. Frost and M. F. Ashby}, year = {1982}, } @article{v9-lit-gerber-1874, title = {Bestimmung der zulässigen Spannungen in Eisenkonstruktionen}, author = {H. Gerber}, year = {1874}, journal = {Zeitschrift des Bayerischen Architekten- und Ingenieur-Vereins}, } @techreport{v9-lit-gilmore-2002, title = {Spacecraft Thermal Control Handbook}, author = {D. G. Gilmore}, year = {2002}, } @techreport{v9-lit-goldstein-2003, title = {Scanning Electron Microscopy and X-ray Microanalysis}, author = {J. I. Goldstein and D. E. Newbury and J. R. Michael and N. W. M. Ritchie and J. H. J. Scott and D. C. Joy}, year = {2003}, } @techreport{v9-lit-goodman-1899, title = {Mechanics Applied to Engineering}, author = {J. Goodman}, year = {1899}, } @techreport{v9-lit-gray-2000, title = {Classic split-Hopkinson pressure bar testing}, author = {G. T. Gray III}, year = {2000}, } @article{v9-lit-griffith-1921, title = {The phenomena of rupture and flow in solids}, author = {A. A. Griffith}, year = {1921}, doi = {10.1098/rsta.1921.0006}, journal = {Philosophical Transactions of the Royal Society A}, } @article{v9-lit-grossmann-1942, title = {Hardenability calculated from chemical composition}, author = {M. A. Grossmann}, year = {1942}, journal = {Transactions of AIME}, } @article{v9-lit-grubbs-1969, title = {Procedures for detecting outlying observations in samples}, author = {F. E. Grubbs}, year = {1969}, doi = {10.1080/00401706.1969.10490657}, journal = {Technometrics}, } @techreport{v9-lit-gum-2008, title = {Evaluation of measurement data — Guide to the expression of uncertainty in measurement (GUM)}, author = {JCGM}, year = {2008}, } @article{v9-lit-haigh-1917, title = {The endurance of metals under alternating stresses of unequal range}, author = {B. P. Haigh}, year = {1917}, journal = {Journal of the Institution of Electrical Engineers}, } @article{v9-lit-hall-1951, title = {The deformation and ageing of mild steel: III discussion of results}, author = {E. O. Hall}, year = {1951}, doi = {10.1088/0370-1301/64/9/302}, journal = {Proceedings of the Physical Society B}, } @article{v9-lit-herzog-2016, title = {Additive manufacturing of metals}, author = {D. Herzog and V. Seyda and E. Wycisk and C. Emmelmann}, year = {2016}, doi = {10.1016/j.actamat.2016.07.019}, journal = {Acta Materialia}, } @article{v9-lit-irwin-1957, title = {Analysis of stresses and strains near the end of a crack traversing a plate}, author = {G. R. Irwin}, year = {1957}, doi = {10.1115/1.4011547}, journal = {Journal of Applied Mechanics}, } @article{v9-lit-izod-1903, title = {Testing of materials by impact}, author = {E. G. Izod}, year = {1903}, journal = {Engineering}, } @article{v9-lit-jkr-1971, title = {Surface energy and the contact of elastic solids}, author = {K. L. Johnson and K. Kendall and A. D. Roberts}, year = {1971}, doi = {10.1098/rspa.1971.0141}, journal = {Proceedings of the Royal Society A}, } @techreport{v9-lit-johnson-1985, title = {Contact Mechanics}, author = {K. L. Johnson}, year = {1985}, } @article{v9-lit-jominy-1938, title = {Hardenability of steel — the Jominy end-quench test}, author = {W. E. Jominy and A. L. Boegehold}, year = {1938}, journal = {Transactions of the American Society for Metals}, } @article{v9-lit-kolsky-1949, title = {An investigation of the mechanical properties of materials at very high rates of loading}, author = {H. Kolsky}, year = {1949}, doi = {10.1088/0370-1301/62/11/302}, journal = {Proceedings of the Physical Society B}, } @techreport{v9-lit-krautkramer-1990, title = {Ultrasonic Testing of Materials}, author = {J. Krautkrämer and H. Krautkrämer}, year = {1990}, } @article{v9-lit-larson-miller-1952, title = {A time-temperature relationship for rupture and creep stresses}, author = {F. R. Larson and J. Miller}, year = {1952}, journal = {Transactions of the ASME}, } @techreport{v9-lit-malacara-2007, title = {Optical Shop Testing}, author = {D. Malacara}, year = {2007}, } @techreport{v9-lit-manson-1953, title = {Behavior of materials under conditions of thermal stress}, author = {S. S. Manson}, year = {1953}, } @article{v9-lit-marshall-evans-1985, title = {The influence of crack shape on indentation fracture toughness}, author = {D. B. Marshall and A. G. Evans}, year = {1985}, journal = {Journal of the American Ceramic Society}, } @article{v9-lit-michelson-1881, title = {The relative motion of the Earth and the luminiferous ether}, author = {A. A. Michelson}, year = {1881}, journal = {American Journal of Science}, } @article{v9-lit-miner-1945, title = {Cumulative damage in fatigue}, author = {M. A. Miner}, year = {1945}, journal = {Journal of Applied Mechanics}, } @article{v9-lit-neuber-1961, title = {Theory of notch stresses}, author = {H. Neuber}, year = {1961}, journal = {Journal of Applied Mechanics}, } @article{v9-lit-nix-gao-1998, title = {Indentation size effects in crystalline materials: a law for strain gradient plasticity}, author = {W. D. Nix and H. Gao}, year = {1998}, doi = {10.1016/S0022-5096(98)00031-8}, journal = {Journal of the Mechanics and Physics of Solids}, } @techreport{v9-lit-norton-1929, title = {The Creep of Steel at High Temperatures}, author = {F. H. Norton}, year = {1929}, } @techreport{v9-lit-ohanlon-2003, title = {A User’s Guide to Vacuum Technology}, author = {J. F. O’Hanlon}, year = {2003}, } @article{v9-lit-oliver-pharr-1992, title = {An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments — Extended reading 28}, author = {W. C. Oliver and G. M. Pharr}, year = {1992}, doi = {10.1557/JMR.1992.1564}, journal = {Journal of Materials Research}, } @article{v9-lit-oliver-pharr-2004, title = {Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology}, author = {W. C. Oliver and G. M. Pharr}, year = {2004}, doi = {10.1557/jmr.2004.19.1.3}, journal = {Journal of Materials Research}, } @article{v9-lit-pan-2009, title = {Two-dimensional digital image correlation for in-plane displacement and strain measurement: a review — Extended reading 31}, author = {B. Pan and K. Qian and H. Xie and A. Asundi}, year = {2009}, doi = {10.1088/0957-0233/20/6/062001}, journal = {Measurement Science and Technology}, } @article{v9-lit-paris-erdogan-1963, title = {A critical analysis of crack propagation laws}, author = {P. C. Paris and F. Erdogan}, year = {1963}, doi = {10.1115/1.3656900}, journal = {Journal of Basic Engineering}, } @article{v9-lit-petch-1953, title = {The cleavage strength of polycrystals}, author = {N. J. Petch}, year = {1953}, journal = {Journal of the Iron and Steel Institute}, } @article{v9-lit-peters-ranson-1982, title = {Digital imaging techniques in experimental stress analysis}, author = {W. H. Peters and W. F. Ranson}, year = {1982}, doi = {10.1117/12.7972925}, journal = {Optical Engineering}, } @article{v9-lit-pharr-oliver-brotzen-1992, title = {On the generality of the relationship among contact stiffness, contact area, and elastic modulus during indentation — Extended reading 30}, author = {G. M. Pharr and W. C. Oliver and F. R. Brotzen}, year = {1992}, doi = {10.1557/JMR.1992.0613}, journal = {Journal of Materials Research}, } @techreport{v9-lit-pourbaix-1974, title = {Atlas of Electrochemical Equilibria in Aqueous Solutions}, author = {M. Pourbaix}, year = {1974}, } @article{v9-lit-raccuglia-2016, title = {Machine-learning-assisted materials discovery using failed experiments}, author = {P. Raccuglia and K. C. Elbert and P. D. F. Adler and C. Falk and M. B. Wenny and A. Mollo and M. Zeller and S. A. Friedler and J. Schrier and A. J. Norquist}, year = {2016}, doi = {10.1038/nature17439}, journal = {Nature}, } @article{v9-lit-ramprasad-2017, title = {Machine learning in materials informatics: recent applications and prospects}, author = {R. Ramprasad and R. Batra and G. Pilania and A. Mannodi-Kanakkithodi and C. Kim}, year = {2017}, doi = {10.1038/s41524-017-0056-5}, journal = {npj Computational Materials}, } @article{v9-lit-rayleigh-1879, title = {Investigations in optics, with special reference to the spectroscope}, author = {Lord Rayleigh}, year = {1879}, journal = {Philosophical Magazine}, } @article{v9-lit-rice-1968, title = {A path independent integral and the approximate analysis of strain concentration by notches and cracks}, author = {J. R. Rice}, year = {1968}, doi = {10.1115/1.3601206}, journal = {Journal of Applied Mechanics}, } @techreport{v9-lit-russ-dehoff-2000, title = {Practical Stereology}, author = {J. C. Russ and R. T. Dehoff}, year = {2000}, } @article{v9-lit-sneddon-1965, title = {The relation between load and penetration in the axisymmetric Boussinesq problem for a punch of arbitrary profile}, author = {I. N. Sneddon}, year = {1965}, doi = {10.1016/0020-7225(65)90019-4}, journal = {International Journal of Engineering Science}, } @article{v9-lit-stoney-1909, title = {The tension of metallic films deposited by electrolysis}, author = {G. G. Stoney}, year = {1909}, doi = {10.1098/rspa.1909.0021}, journal = {Proceedings of the Royal Society A}, } @techreport{v9-lit-sutton-2009, title = {Image Correlation for Shape, Motion and Deformation Measurements}, author = {M. A. Sutton and J. J. Orteu and H. W. Schreier}, year = {2009}, } @article{v9-lit-swt-1970, title = {A stress-strain function for the fatigue of metals}, author = {K. N. Smith and P. Watson and T. H. Topper}, year = {1970}, journal = {Journal of Materials}, } @techreport{v9-lit-tabor-1951, title = {The Hardness of Metals}, author = {D. Tabor}, year = {1951}, } @techreport{v9-lit-vandervoort-1984, title = {Metallography: Principles and Practice}, author = {G. F. Vander Voort}, year = {1984}, } @techreport{v9-lit-vim-2012, title = {International vocabulary of metrology — Basic and general concepts and associated terms (VIM)}, author = {JCGM}, year = {2012}, } @article{v9-lit-welch-1947, title = {The generalization of Student’s problem when several different population variances are involved}, author = {B. L. Welch}, year = {1947}, doi = {10.1093/biomet/34.1-2.28}, journal = {Biometrika}, } @article{v9-lit-wohler-1870, title = {Über die Festigkeitsversuche mit Eisen und Stahl}, author = {A. Wöhler}, year = {1870}, journal = {Zeitschrift für Bauwesen}, } @techreport{v9-lit-wunderlich-1990, title = {Thermal Analysis}, author = {B. Wunderlich}, year = {1990}, }